Dimensions Guide

Commercial Style Gas Cooktop
®
CABINET REQUIREMENTS
*NOTES: Dimension “B” can be reduced by 6" (15.2 cm) when bottom of wood or metal cabinet is covered by not less than
0.25" (6.4 mm) flame retardant millboard covered with not less than No. 28 MSG sheet metal, 0.015" (0.4 mm) stainless steel,
0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.
If installing a range hood above the cooktop, follow the range hood instructions for dimensional clearances above the cooktop
surface.
**NOTE: If backwall is constructed of a combustible material and a backguard is not installed, a minimum clearance of dimension A +
6" (15.2 cm) is required for
48" (121.9 cm) cooktops and cooktops with a grill.
A. Grounded 3-prong outlet should be located on
left-hand side of the cutout 16" (40.6 cm) max.
from enclosure sidewall
B. 10" (25.4 cm) min. clearance from countertop to
top of the outlet
C. 14" (35.6 cm) countertop to the gas supply line
D. Gas supply line should be located in this area on
rear or side walls, or the supply line can come up
through the floor.
NOTE: Solid side and bottom of cutout enclosure
not shown.
A
B
C
D
B min.*
C
A**
D
E
F
I
J
K
M
G
N
O
H
C
E
L
P
L
D
A. See chart.
B. See chart.
C. See chart.
D. See chart.
E. See chart.
F. 18" (45.7 cm) min. clearance upper
cabinet to countertop
G.
" (1.9 cm) back of cabinet cutout to gas
opening cutout
H.
" (16.1 cm) gas opening cutout depth
" (31.7 cm) gas opening cutout width
J. " (56.5 cm) cabinet cutout depth
K. 2" (5.1 cm) cabinet side to gas cutout
L. 6" (15.2 cm) min. distance on both sides of the
cooktop to the side wall or other combustible
material above cooking surface
M. 24" (61.0 cm) cabinet depth
N. " (18.4 cm) cabinet depth to countertop
O. Notch to be equal on both sides
P. 13" (33.0 cm) upper cabinet depth
Size Model A**
Cooktop Cutout
to Back Wall
B*
Cooktop to
Cabinet
C
Optional
Backguard
Opening
D
Cabinet and
Countertop
E
Countertop Only
30" (76.2 cm) KGCU407 30" (76.2 cm) ) 30" (76.2 cm) or
29 (75.9 cm) for
zero clearance
36" (91.4 cm) KGCU462
KGCU463
KGCU467
36" (91.4 cm) or
35 (91.1 cm) for
zero clearance
48" (121.9 cm) KGCU482
KGCU483
KGCU484
47 (121.6 cm) for
zero clearance
Gas and Electric
Connection Locations
1¾" (4.4 cm)**
1½" (3.8 cm)**
1¾" (4.4 cm)
1¾" (4.4 cm)
1¾" (4.4 cm)**
1½" (3.8 cm)**
1½" (3.8 cm)**
42" (106.7 cm)
42" (106.7 cm)
36" (91.4 cm)
48" (121.9 cm)
30" (76.2 cm) 29¼" (74.3 cm)
35¼"
(89.5 cm)
47¼" (120.0 cm) 48" (121.9 cm) or
⁷⁄₈"
⁷⁄₈"
⁷⁄₈"
7¼
22¼
12½
6⁷⁄₈
¾
I.
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10271686D
08/26/09
Page 2 of 2