Control Guide

Table Of Contents
4
KEYPAD FEATURE INSTRUCTIONS
STEAM COOK Manual Steam
Cook
1. Touch STEAM COOK.
2. Touch the number keypad “6.”
OR
Touch STEAM COOK repeatedly to scan and select the Manual steam setting.
3. Touch the number keypads to set a length of time to steam. Time can be set up to 99
minutes and 99 seconds.
NOTE: Doneness function is not active for manual steam cooking.
4. Touch START.
Once the boiling point is reached the upper oven display will start to count down the
steam time.
When the stop time is reached, the oven will shut off automatically and “Steam
Complete” will appear in the display.
If enabled, end-of-cycle tones will sound, and then reminder tones will sound every
minute.
5. Touch CANCEL or open the door to clear the display and/or stop reminder tones.
POPCORN Popcorn
1. Touch POPCORN.
NOTE: Doneness function is not active for popcorn setting.
2. Touch START.
When the stop time is reached, the oven will shut off automatically and “Cooking
Complete” will appear in the display.
If enabled, end-of-cycle tones will sound, and then reminder tones will sound every
minute.
3. Touch CANCEL or open the door to clear the display and/or stop reminder tones.
SOFTEN MELT Soften
1. 1. Touch SOFTEN MELT.
2. Touch number keypad “2” to select Soften function.
OR
Touch SOFTEN MELT repeatedly to scan and select Soften.
3. Touch number keypad to select food type from the Soften Chart.
OR
Touch SOFTEN MELT repeatedly to scan and select food settings.
4. 4. Touch number keypads to enter quantity (weight or sticks).
To change the doneness setting, touch the Power keypad before or after the “Start?”
prompt is displayed to toggle through and select a doneness of Normal, More, or Less.
5. Touch START.
The upper oven display will count down the soften time.
When the stop time is reached, the oven will shut off automatically and “Soften
Complete” will appear in the display. If enabled, end-of-cycle tones will sound, and
then reminder tones will sound every minute.
6. Touch CANCEL or open the door to clear the display and stop the reminder tones.
SOFTEN MELT Melt
1. Touch SOFTEN MELT.
2. Touch number keypad “1” to select Melt function.
OR
Touch SOFTEN MELT repeatedly to scan and select Melt.
3. Touch number keypad to select food type from the Melt Chart.
OR
Touch SOFTEN MELT repeatedly to scan and select food settings.
4. Touch number keypads to enter quantity (weight or sticks). To change the doneness
setting, touch the Power keypad before or after the “Start?” prompt is displayed to
toggle through and select a doneness of Normal, More, or Less.
5. Touch START.
The upper oven display will count down the melt time. When the stop time is reached,
the oven will shut off automatically and “Melt Complete” will appear in the display. If
enabled, end-of-cycle tones will sound, and then reminder tones will sound every
minute.
6. Touch CANCEL or open the door to clear the display and/or stop the reminder tones.