Instruction for Use

CHILD LOCK
THIS FUNCTION IS TURNED ON/OFF by pressing
the Back and OK buttons simultaneously for 5
seconds until the key symbol
is displayed. No buttons or
knobs will function when this
safety feature is activated.
I
T CAN BE TURNED ON/OFF
AT ANY TIME even during cooking.
START PROTECTION
T
HIS AUTOMATIC SAFETY FUNCTION IS ACTIVATED
ONE MINUTE AFTER
the oven has returned to
“stand by mode“. (The oven is in “stand by” when
the 24-hour clock is displayed or if the clock has
not been set, when the display is blank).
T
HE DOOR MUST BE OPENED AND CLOSED e.g.
putting food into it, before the safety lock is
released.
Else the display will show “DOOR“.
Start protection / child lock
8
Cooking Level Adjustment
IS AVAILABLE IN THE AUTO REHEAT FUNCTION:
In this function, you have the possibility to
personally control the end result through the
Cooking Level Adjustment feature. This feature
enables you to achieve higher or lower end
temperature compared to the default standard
setting.
WHEN USING this function the oven chooses the
default standard setting. This setting normally gives
you the best result. But if the food you heated
became too warm to eat at once, you can easily
adjust this before you use that function the next
time. This is done by adjusting the Cooking Level
with the adjust knob right after you have pressed
the Start button.
N
OTE:
THE COOKING LEVEL can only be set or altered
during the first 20 seconds of operation.
DONENESS
L
EVEL EFFECT
COOKING LEVEL +2
YIELDS HIGHEST
END TEMPERATURE
COOKING LEVEL +1
YIELDS HIGHER
END TEMPERATURE
COOKING LEVEL 0
DEFAULT
STANDARD SETTING
COOKING LEVEL -1
YIELDS LOWER
END TEMPERATURE
COOKING LEVEL -2
YIELDS LOWEST
END TEMPERATURE
WHEN A FUNCTION IS FINISHED, the oven may
carry out a cooling procedure. This is normal and
switches off automatically when finished.
THE COOLING PROCEDURE can be interrupted
without any harm to the oven by opening the door.
Cooling down
THE OVEN IS IN “STAND BY” when the 24 hour
clock is displayed. The displaying of the clock can
be turned off by turning the function knob to the
zero position and pressing the Back button.
THE CLOCK WILL RETURN as soon as any
button or knobs are operated or simply
by pressing the Back button again.
Stand by