Dispensing Guide

ManualsBrandsKitchenAid ManualsAppliances36 in. W 25.8 cu. ft. French Door Refrigerator in Black Stainless with Platinum Interior

Table Of Contents

FFrreenncchh DDoooorr BBoottttoomm MMoouunntt DDiissppeennssiinngg aanndd SSttoorraaggee GGuuiiddee

Water and Ice Dispenser Controls

A. Ice/Water dispenser paddle

Press Ice/Water to toggle through the following choices in a

continuous loop:

� Water (default) - Dispenses water.

� Cubed - Dispenses cubed ice.

� Crushed - Dispenses crushed ice.

TO DISPENSE WATER (STANDARD)

1. Select water.

2. Press a sturdy glass against the water dispenser paddle.

3. Remove the glass to stop dispensing.

TO DISPENSE WATER (MEASURED FILL)

Measured Fill allows you to dispense a specified amount of water

with the touch pad.

NOTE: The amount of water you select will be dispensed. Be sure

that the container is empty and can hold the entire volume. If ice is

in the container, you may need to adjust your selection.

Household water pressure may affect the accuracy of the

Measured Fill feature. For optimum performance of your water

dispenser, you must first calibrate Measured Fill. For best results,

calibration should be performed when water is not being used in

the house.

How to calibrate Measured Fill:

IMPORTANT: Flush the water system before calibrating

Measured Fill.

1. Place a sturdy measuring cup (1-cup [237 mL] size) on the

dispenser tray centered in front of the water dispenser paddle.

NOTE: Depending on your model, a measuring cup may be

provided.

2. Press and hold the Options and Lock buttons at the same

time for 3 seconds. The words “Back” and “1 Cup” will appear

on the display screen. Also, the Calibrate Measured Fill icon

will illuminate and remain lit while the Measured Fill feature is

being calibrated.

NOTE: You may press Ice/Water “Back” at any time to exit

calibration mode. The Calibrate Measured Fill icon will disappear.

3. Press and release the water dispenser paddle, as needed, to

dispense water to the 1 cup fill line.

NOTE: If overfilling or spilling occurs, discard the water and

press “Back” to restart the calibration process.

4. When 1 cup of water has been correctly dispensed into the

measuring cup, press the Measured Fill button under the word

“Confirm” to confirm the calibration.

When Measured Fill calibration has been confirmed, the

Calibration icon will disappear and the display will return to the

home screen.

1. Press Measured Fill to turn the feature on. When the feature

is on, the Measured Fill screen appears on the display. Press

Ice/Water “Back” to manually turn off the Measured Fill

feature.

NOTE: The dispenser will automatically turn off Measured Fill

after 1 minute of inactivity. When Measured Fill is turned off,

any changes you have made will be lost and all defaults will

be restored.

2. You can dispense water by the ounce, cup, or liter. The default

unit is ounces. To switch to cups, ounces, or liters, press the

Light button.

Default, minimum, and maximum volumes are listed below.

Units Default Minimum Maximum

Ounces 8 1 128

Cups 1 1/4 16

Liters 0.25 0.05 4.00

3. Press the Lock and Options buttons to adjust the volume as

desired. The Lock button increases the volume, and the

Options button lowers the volume.

NOTE: Most coffee cups (commonly 4 to 6 oz [118 to 177 mL]

per cup) are not the same size as a measuring cup (8 oz [237

mL]). You may need to adjust the volume to avoid

unintentionally overfilling coffee cups.

When increasing or decreasing the dispense volumes, if an

adjustment button (-/+) is held for approximately 10 seconds

or longer the control may stop responding. Release the button

for approximately 2 seconds and then continue making the

adjustment.

Summary of content (11 pages)

PAGE 1
French Door Bottom Mount Dispensing and Storage Guide Water and Ice Dispenser Controls 3. Press and release the water dispenser paddle, as needed, to dispense water to the 1 cup fill line. NOTE: If overfilling or spilling occurs, discard the water and press “Back” to restart the calibration process. A. Ice/Water dispenser paddle Press Ice/Water to toggle through the following choices in a continuous loop: 4.
PAGE 2
4. Dispense water. NOTE: While dispensing water, the digital display will count down how much water remains to be dispensed, according to the volume you selected. The flow of water will automatically stop once the desired volume has been dispensed. � Press a sturdy glass against the dispenser paddle. or � Place the glass below the water dispenser and press Measured Fill, under Dispense, for hands-free dispensing. 5.
PAGE 3
To replace crisper(s) cover: 1. Fit back of cover frame into supports on side walls of the refrigerator and lower the front of the cover frame into place. 2. Slide rear of glass insert into cover frame and lower front into place. 3. Replace crisper drawers. CRISPER EASYSLIDE BIN A shallow storage compartment with glass lids which slide from side to side is located below and in front of the crisper drawers.
PAGE 4
Guide de rangement et du distributeur du réfrigérateur à porte à double battant et congélateur au bas Commandes du distributeur d’eau et de glaçons 2. Appuyer simultanément et sans relâcher sur les boutons Options et Lock (verrouillage) pendant 3 secondes. Les mots « Back » (retour) et « 1 Cup » (1 tasse) apparaissent sur l’écran d’affichage. L’icône de calibration du remplissage mesuré s’allume également et elle reste allumée pendant le calibrage de la fonction de remplissage mesuré.
PAGE 5
2. Il est possible de puiser l’eau par once, par tasse ou par litre. L’unité utilisée par défaut est l’once. Pour passer aux tasses, aux onces ou aux litres, appuyer sur le bouton Light (éclairage). Les volumes par défaut, minimum et maximum sont indiqués ci-dessous. Unités Par défaut Minimum Maximum Onces 8 1 128 Tasses 1 1/4 16 Litre 0,25 0,05 4,00 3. Appuyer sur les boutons Lock (verrouillage) et Options pour régler le volume comme désiré.
PAGE 6
Tiroir à contrôle de température BAC À LÉGUMES EASYSLIDE IMPORTANT: Le tiroir réfrigéré du côté gauche comporte sa propre commande de température. Cette commande règle la température de ce tiroir uniquement. La température du tiroir de droite est la même que celle du compartiment principal du réfrigérateur.
PAGE 7
SÉPARATEURS POUR BAC/TIROIR RÉGLABLE Chaque tiroir réfrigéré comporte un bac avec séparateur qui peut être positionné à l’une ou l’autre des trois positions, ou retiré pour maximiser l’espace de rangement des aliments en fonction de vos besoins. Autres caractéristiques du tableau de commande TÉMOIN DE COUPURE DE COURANT Le témoin de panne de courant indique à l’utilisateur si l’alimentation électrique du réfrigérateur a été interrompue et que la température du congélateur a atteint 18 °F (-8 °C) ou plus.
PAGE 8
Guía de despacho y almacenamiento del refrigerador de dos puertas con montaje en la parte inferior Controles del despachador de agua y hielo 2. Mantenga presionados los botones Options (Opciones) y Lock (Bloquear) al mismo tiempo durante 3 segundos. Aparecerán en la pantalla las palabras “Back” (Volver) y “1 Cup” (1 taza). También se iluminará el ícono de calibrado del llenado medido y permanecerá encendido mientras se esté calibrando la función de Measured Fill (Llenado medido).
PAGE 9
2. Puede despachar agua por onza, taza o litro. La unidad predeterminada es onzas. Para cambiar a tazas o litros, presione el botón Light (Luz). A continuación se enumeran los volúmenes predeterminados, mínimos y máximos. Unidades Predeterminado Mínimo Máximo Onzas 8 1 128 Tazas 1 1/4 16 Litros 0,25 0,05 4 3. Presione los botones de Lock (Bloquear) o de Options (Opciones) para ajustar el volumen que desea.
PAGE 10
Cajón con control de temperatura IMPORTANTE: El cajón refrigerado izquierdo tiene su propio control de temperatura. Este control fija la temperatura solamente para este cajón. La temperatura para el cajón derecho se fija a la misma temperatura del compartimiento principal del refrigerador.
PAGE 11
Para quitar y volver a colocar los recipientes interiores: 1. Para quitarlo, sujete los costados del recipiente, levántelo y jálelo. 2. Para volver a colocarlo, baje el recipiente hacia las guías del cajón con la parte posterior del recipiente orientada hacia la parte trasera del refrigerador.