Installation Guide

Install Chimney Covers

1. Install damper on top of the exhaust opening. Check that the

damper opens freely.

2. Connect the vent system and seal all connections with

clamps.

Install Upper Chimney Cover

1. Slightly spread the sides of the cover apart and hook them

behind the chimney mounting brackets.

2. Attach the cover to the brackets with 2 flat head screws.

3. Securely tighten screws.

Install Lower Chimney Cover

1. Slightly spread the sides of the cover apart and hook them

behind the upper chimney.

2. Secure the lower chimney covers to the range hood canopy

using 4 - 4.2 x 8 mm screws.

Complete Installation and Check Operation

1. Install grease filters. See “Range Hood Care” section.

2. Check operation of the range hood blower and lights. See

“Range Hood Use” section.

3. If range hood does not operate, check to see whether a

circuit breaker has tripped or a household fuse has blown.

Disconnect power supply and check that the wiring is

correct.

NOTE: To get the most efficient use from your new range hood,

read the “Range Hood Use” section.

A. 2 flat head screws

A. Lower chimney covers

B. Range hood canopy

C. 4 - 4.2 x 8 mm screws

A. Halogen lights

B. Blower control switches

C. Halogen light switch

D. Heat lamp switch

E. Heat lamps

F. Grease filter

G. Grease filter handles