User Manual

light be a constant glow.

2. When the battery is low, it will blink Red at a steady pace indicating that the battery will

need to be charged soon.

3. If the device has not been charged for a long period of time, the Red light may take a

few hours to light up and start blinking. If you have not charged the device for a long

time and the light does not light up when the device is plugged in, please allow at least

6 hours of charge, and then try to power the device on.

Cellular Data Signal LED: Green Light

1. The Green light blinks to indicate that the device has successfully connected to the

Cellular Data network

2. If there are no Cellular Data networks connected, the light will remain off.

Getting Started

With your iTrail Solo purchase, an activation fee was included in your purchase price. Please

go to http://myitrail.com and click on “Activate Device” to sign up for a Billing account and

select a Data Subscription Plan that will fit your needs.

For this process, you will be signing up for two separate accounts: one for Billing and one

for the Live Tracking platform. You will therefore receive two separate email

confirmations: one will be a confirmation email stating you have created a Billing account,

or that you have added a data plan to your existing account. The second email will contain

your Tracking account credentials. Your Tracking account is created for you by our iTrail

Support Team.

Note: It may take 24-48 hours for your Activation and your two accounts to be created.

The first thing you need to do before you can start tracking is to charge the iTrail Solo. Plug

the A/C adapter into a wall outlet and connect the charger to the charging port. Charge the

Solo for at least 6 hours before first use. When fully charged, the Orange light will stop

glowing. When the device is done charging, disconnect it from the charger and press the

Power button to turn the device on.