Assembly Instructions

11
Attaching Cover Panels to Islands and Peninsulas:
Attachingcoverpanelstothebackofanislandorpeninsulawillrequiresomeadditionalstepsthan
standardcoverpanelinstallation.
Materials Needed:
• 1-1/4"WoodScrews
Countertop
CoverPanelSeam
FinishedEnd
FinishedEnd
CoverPanel
*Whenislandorpeninsulalengthrequires
2coverpanels,aseamwillberequired.
Measureandcutsoseamisincenterof
cabinetrun.
CoverPanel
Cover Panel Installation
1)
Tofastencoverpaneltobackofcabinet,clampintoplaceandsecureusing1-1/4"screws(not
provided)throughtheinteriorofthecabinetintothetop&bottomfasteningstrips.
Usingscrewslongerthan1-1/4"putyouatriskofascrewgoingthroughyourcoverpanel.
Payattentiontoyourlayout.Ifyouhaveadiagonalcornerbasecabinetwithasolidback,you
willwanttousethescrewsthatareprovidedwithyourcoverpanel.