Product Brochure

53437
Ship-Auger Bits with Screw Point
•
Drills through nails, wood, vinyl, plastics and heavy timber
•
Special bit steel with machine-ground flutes and polished
edges for smooth, wobble-free boring
•
Full length is heat-treated and tempered
•
Deep, open-throat design clears chips for faster, cleaner cuts
•
7/16" hex shafts fit 1/2" and larger three-jaw chucks
•
Head and twist are ground to correct clearance for easy
removal from hole
•
For heavy construction and repair work in mines, on docks
and bridges, as well as electrical work
Cat. No. Tip Size Twist Length Overall Length Weight
53402 3/4" (19.1 mm) 4" (101.6 mm) 6" (152.4 mm) 6.4 oz. (181 g)
53404 7/8" (22.2 mm) 4" (101.6 mm) 6" (152.4 mm) 8.0 oz. (227 g)
53406 1" (25.4 mm) 4" (101.6 mm) 6" (152.4 mm) 8.0 oz. (227 g)
53408 1-1/8" (28.6 mm) 4" (101.6 mm) 6" (152.4 mm) 12.8 oz. (363 g)
53437 3/4" (19.1 mm) 15" (381.0 mm) 18" (457.2 mm) 15.2 oz. (431 g)
53439 7/8" (22.2 mm) 15" (381.0 mm) 18" (457.2 mm) 1.2 lbs. (0.54 kg)
53441 1" (25.4 mm) 15" (381.0 mm) 18" (457.2 mm) 1.7 lbs. (0.77 kg)
53443 1-1/8" (28.6 mm) 15" (381.0 mm) 18" (457.2 mm) 1.8 lbs. (0.82 kg)
Conical Anchor Kit-100 Fasteners
•
Kit contains: 100 #2 Phillips, 10 x 1" Screws, and 100 plastic anchors
•
1/4" Masonry drill bit also included
53729
Cat. No. Anchor Size Screw Size Tip Size Weight
53729 #10 - #12 #10 x 1" (25.4 mm) 1/4" (6.4 mm) 1.0 lbs. (0.45 kg)
Anchors
13-Piece Regular-Point Drill-Bit Set
•
Hinged metal box with one stand-up bit holder
•
General-purpose, high-speed bits
for reliable performance in a wide
range of materials
•
Standard jobber length
•
Black-oxide finish
reduces chip welding
53002
Cat. No. Set Contains
53002
Cat. No. Tip Size
53100 1/16" (1.59 mm)
53101 5/64" (2.0 mm)
53102 3/32" (2.4 mm)
53103 7/64" (2.8 mm)
53104 1/8" (3.2 mm)
53105 9/64" (3.6 mm)
53106 5/32" (4.0 mm)
Weight
9.6 oz. (272 g)
Cat. No. Tip Size
53107 11/64" (4.4 mm)
53108 3/16" (4.8 mm)
53109 13/64" (5.2 mm)
53110 7/32" (5.6 mm)
53111 15/64" (6.0 mm)
53112 1/4" (6.4 mm)
15-Piece Regular-Point Drill-Bit Set
•
Hinged metal box with two stand-up bit holders
•
General-purpose, high-speed bits
for reliable performance in a wide
range of materials
•
Standard jobber length
•
Black-oxide finish
reduces chip welding
•
Lightly roughened
surface has higher
lubricity for easier chip flow
53001
Cat. No. Set Contains
53001
Cat. No. Tip Size
53100 1/16" (1.59 mm)
53102 3/32" (2.4 mm)
53104 1/8" (3.2 mm)
53106 5/32" (4.0 mm)
53108 3/16" (4.8 mm)
53110 7/32" (5.6 mm)
53112 1/4" (6.4 mm)
53114 9/32" (7.1 mm)
Weight
2.0 lbs. (0.91 kg)
Cat. No. Tip Size
53116 5/16" (7.9 mm)
53118 11/32" (8.7 mm)
53120 3/8" (9.5 mm)
53122 13/32" (10.3 mm)
53124 7/16" (11.1 mm)
53126 15/32" (11.9 mm)
53128 1/2" (12.7 mm)
Ship-Auger Bits
Drill Bit Sets
See page 310 for additional information on warnings.
www.kleintools.com
243
Holemaking Products & Accessories
NOTE: Read and follow safety instructions in power tool owner's manual.