Buying Guide

Differential Temperature
Clamp Meter
Includes:
•
Carrying case
•
Test leads with
CATIII/CAT IV safety caps
•
Two Type K thermocouples
•
3 x AAA Batteries
•
CL450 HVAC Clamp Meter is an automatically ranging true root mean
square (TRMS) digital clamp meter that measures differential temperature
via K-Type thermocouple probes; AC current and Inrush current via the
clamp; AC/DC voltage, DC Microamps, resistance, continuity, frequency,
capacitance, and test diodes via test leads.
2000A Digital
Clamp Meter
Includes:
•
Carrying Case
•
Instruction Manual
•
Straight Input Test Leads
•
2 x AAA Batteries
•
CL900 is an auto-ranging, true root mean square (TRMS) 2000A digital
clamp meter that measures AC/DC current via the clamp and measures
AC/DC voltage, resistance, continuity, frequency, duty cycle, capacitance,
and tests diodes via test leads. It features a Low Impedance (LoZ) mode
for identifying and eliminating ghost or stray voltages, and has a dedicated
mode for capturing Inrush Current.
Cat. No. Batteries Jaw Size Standard Included Overall Length Overall Height Overall Width Weight
CL450 3 x AAA 1-5/8"
(41.3 mm)
CATIV 600V:
CE Certified
Carry Case, Test Leads,
2 Type K Thermocouples, Batteries
10"
(250.0 mm)
1-9/16"
(39.7 mm)
3-3/4"
(95.3 mm)
13.6 oz
(386 g)
CL900 2 x AAA 2"
(50.4 mm)
CAT IV 600V,
CAT III 1000V
Carrying Case, Instruction Manual,
Straight Input Test Leads, Batteries
10-25/64"
(264.2 mm)
1-45/64"
(44.1 mm)
3.9"
(99.1 mm)
17.6oz
(499 g)
Features
CL450 CL900
Drop Protection 6.6 ft. (2 m) 6.6 ft. (2 m)
Ingress Protection
–
IP40
Safety
CAT IV 600V
CAT III 1000V
CAT IV 600V
CAT III 1000V
AC Voltage (Volts) 1000V 1000V
DC Voltage (Volts) 1000V 1000V
AC + DC Voltage
–
AC Current (Amps) 600A
DC Current (Amps)
–
Ohms (Resistance)
60MΩ 60MΩ
DC Millivolts
–
DC Microamps
True RMS
Non-Contact Voltage Testing
Low-Pass Filter
–
Low Impedance
Inrush Current
Audible Continuity
Backlight
Differential Temperature
-40° – 1832°F
(-40° – 1000°C)
–
Digital Temperature Calibration
–
Auto Ranging
Range Hold
Data Hold
Diode Test
Capacitance Test
Frequency / Duty Cycle
Max / Min
Relative Mode
–
Auto-Power Off
LCD Display Count 6000 6000
Specialty Clamp Meters
SELECT:
Instructions
Packaging
NEW!
NEW!
NEW!
NEW!
Specifications are subject to change.
See page 295 for additional information on warnings.
www.kleintools.com
194
See warning section on page 193 for important safety information regarding clamp meters
Electrical Test & Measurement