Product Brochure

Electrical Maintenance & Test Kit
•
Cat. No. RT210 detects the most common wiring problems in standard and GFCI receptacles
including open ground, reverse polarity, open hot, open neutral, and hot/ground reversed
•
Cat. No. 69409 Line splitter 10x allows the measuring of current draw up to 15A without splitting
the load's power cord
•
Cat. No. CL110 has CAT III 600V, Class 2, Double insulation safety rating and features a backlit
display for clear readings
•
RT210 withstands a 6.6 ft. (2 m)
•
Includes a carrying case, test leads and batteries
CL110KIT
Cat. No. Kit Contains Weight
CL110KIT 15.1 oz.
(428 g)
Cat. No. Batteries Height Width Depth
CL110 3 x AAA 8-45/64" (221.1 mm) 3-1/64" (76.6 mm) 1-39/64" (40.9 mm)
RT210 N/A 2-7/8" (73.0 mm) 1-7/8" (47.6 mm) 1-5/8" (41.3 mm)
69409 N/A 4-43/64" (118.7 mm) 2-9/32" (57.9 mm) 1" (25.4 mm)
For additional specifications see individual product pages
(CL110 - page 207, RT210 - page 215, 69409 - page 219).
8ZX5
Clamp Meter Specifications
Cat. No. Safety Rating Batteries Jaw Size Height Width Depth Weight Included Accessories
CL110 CAT III 600V 3 x AAA 1-1/8" (28.6 mm) 8-45/64" (221.1 mm) 3-1/64" (76.6 mm) 1-39/64" (40.9 mm) 10.1 oz. (286 g) Carrying Case, 41" (1041.4 mm)
Test Leads and Batteries
CL210 CAT III 600V 3 x AAA 1-1/8" (28.6 mm) 8-45/64" (221.1 mm) 3-1/64" (76.6 mm) 1-39/64" (40.9 mm) 10.1 oz. (286 g) Carrying Case, 41" (1041.4 mm)
Test Leads, Thermocouple with
Adapter, and Batteries
CL310 CAT III 600V 3 x AAA 1-1/8" (28.6 mm) 8-45/64" (221.1 mm) 3-1/64" (76.6 mm) 1-39/64" (40.9 mm) 10.1 oz. (286 g) Carrying Case, 41" (1041.4 mm)
Test Leads, Thermocouple with
Adapter, and Batteries
CL330 CATIII 600V, Class 2,
Double insulation
3 x AAA 1-1/8" (28.6 mm) 8-21/32" (219.9 mm) 3-1/32" (77.0 mm) 1-39/64" (40.9 mm) 9.9 oz. (281 g) Pouch, 41" (1041.4 mm) Test
Leads, Thermocouple, and
Batteries
CL600 CAT IV 600V 2 x AAA 1-3/8" (34.9 mm) 9-3/32" (231.0 mm) 3-13/16" (96.8 mm) 1-35/64" (39.3 mm) 11.8 oz. (335 g) Carrying Case, 41" (1041.4 mm)
Test Leads and Batteries
CL700 CAT IV 600V 2 x AAA 1-3/8" (34.9 mm) 9-3/32" (231.0 mm) 3-13/16" (96.8 mm) 1-35/64" (39.3 mm) 11.8 oz. (335 g) Carrying Case, Test Leads,
Thermocouple with Adapter, and
Batteries
CL800 CAT IV 600V 2 x AAA 1-3/8" (34.9 mm) 9-3/32" (231.0 mm) 3-13/16" (96.8 mm) 1-35/64" (39.3 mm) 12.5 oz. (354 g) Carrying Case, 41" (1041.4 mm)
Test Leads, Thermocouple with
Adapter, and Batteries
NEW!
WARNINGS:
To ensure safe operation and service of the tester, follow these instructions. Failure to observe these warnings can result in severe injury or death.
• Before each use, verify meter operation by measuring a known voltage or current.
• Never use the meter on a circuit with voltages that exceed the category based rating of this meter.
• Do not use the meter during electrical storms or in wet weather.
• Do not use the meter or test leads if they appear to be damaged.
• Ensure meter leads are fully seated, and keep fingers away from the metal probe contacts when making measurements.
• Do not open the meter to replace batteries while the probes are connected.
• Use caution when working with voltages above 60V DC, or 25V AC RMS. Such voltages pose a shock hazard.
• To avoid false readings that can lead to electrical shock, replace batteries if a low battery indicator appears.
• Unless measuring voltage or current, shut off and lock out power before measuring resistance or capacitance.
• Always adhere to local and national safety codes. Use individual protective equipment to prevent shock and arc blast injury where hazardous live conductors are exposed.
Clamp Meters
See page 310 for additional information on warnings.
www.kleintools.com
210
Electrical Test & Measurement