Cut Sheet

81
81
I
nsulated Tools
All dimensions are in inches and (millimeters).
WARNING: Do NOT touch uninsulated portion of the tool or any
conductive object when either might contact an energized source.
WARNING: Wear approved eye protection. Always inspect your tools before
use. Do not use if orange coating cracks, breaks or becomes damaged. Destroy
tool if white layer shows through orange layer.
WARNING: Because moisture, films, or other surface contaminants are
conductive, Klein insulated tools must be kept clean, dry, and free of any surface
contaminants.
WARNING: Only use tools that are marked with the official international
1000-volt rating symbol shown below, if there is any chance that the tools will
make contact with an energized source.
WARNING: Do NOT use screwdrivers to pry or chisel.
WARNING: Whenever possible, always de-energize lines and equipment prior
to working on or around them. Klein insulated tools are designed only to reduce
the chance of injury where the tool may make contact with an energized source.
W
E
A
R
Y
E
Y
P
R
O
T
E
C
T
I
O
N
D
2
1
3
-
9
N
E
N
N
S
Insulated Tool Kits
General-Purpose Insulated
22-Piece Tool Kit
•
Case includes three pallets with custom-
fitted pockets for each tool, piano-hinged cover has
both a combination lock and two key-locked latches
for security, storage space behind the pallets to keep
important papers and accessory items.
•
Inside dimensions:
7-3/4" W x 14-1/4" D x 8" H
(451 mm x 362 mm x 203 mm).
•
Overall dimensions:
18-7/8" W x 15-3/8" D x 8-1/4" H
(479 mm x 391 mm x 210 mm).
•
Replacement case (Cat. No. 33537) available.
33527
See individual tool listings for more details.
Cat. No. Kit Contains Weight
33527 24.30 lbs. (11 kg)
Cat. No. Description
D2000-9NE-INS insulated side-cutting pliers
12098-INS insulated universal side-cutting pliers
D2000-28-INS insulated diagonal-cutting pliers
D2000-48-INS insulated diagonal-cutting pliers – angled head
D203-8N-INS insulated heavy-duty long-nose pliers – side-cutting
D220-7-INS insulated diagonal-cutting pliers – tapered nose
D203-6-INS insulated long-nose pliers – side-cutting
D203-7-INS insulated long-nose pliers – side-cutting
601-4-INS insulated cabinet-tip – round-shank screwdriver (3/16" x 4")
601-7-INS insulated cabinet-tip – round-shank screwdriver (3/16" x 7")
612-4-INS insulated cabinet-tip – round-shank screwdriver (1/8" x 4")
602-4-INS insulated cabinet-tip – round-shank screwdriver (1/4" x 4")
602-7-INS insulated cabinet-tip – round-shank screwdriver (5/16" x 7")
602-8-INS insulated cabinet-tip – round-shank screwdriver (3/8" x 8")
633-4-INS insulated Phillips-tip – round-shank screwdriver (#1 x 4")
603-4-INS insulated Phillips-tip – round-shank screwdriver (#2 x 4")
633-7-INS insulated Phillips-tip – round-shank screwdriver (#3 x 7")
D502-10-INS insulated pump pliers
11045-INS insulated wire stripper/cutter
63050-INS insulated high-leverage cable cutter
1571-INS insulated lineman’s skinning knife
1005-INS insulated crimping/cutting tool
33537 extra-sturdy, bright-yellow case