Cut Sheet

Bare Wire-1613 Series
•
Designed for working with solid and stranded bare
wire from 0.08" (2 mm) to 0.20" (5.1 mm)
•
Lightweight, cost-effective grip
•
Single "V" groove jaw
•
Cat. Nos. 1613-35 and 1613-35H pulls #6 and #8 bare
copper wire without damaging or deforming the cable
1613-30
Cat. No. Latch Model Minimum Cable Maximum Cable Jaw Length Weight
1,500 lbs. (680 kg) Maximum Safe Load
1613-30 — 12 B and S solid 0.08" (2.03 mm) 4 B and S solid 0.20" (5.08 mm) 3" (76.2 mm) 1.5 lbs. (0.68 kg)
4,500 lbs. (2,041 kg) Maximum Safe Load
1613-35 1613-35H #8 AWG Bare Copper #6 AWG Bare Copper 4-3/16" (106.4 mm) 6.0 lbs. (2.72 kg)
1613-35
1613-35 and
1613-35H
pulls #6
and #8 bare
copper wire
PVC-Covered Cable -1659 Series
•
Specially machined serpentine jaws allow insulated
conductor to be inserted through jaws
•
Eliminates necessity of stripping insulation from conductor
•
Round inside-jaw contour
1659-30
Cat. No. Cable Diameter Jaw Length Weight
4,500 lbs. (2,041 kg) Maximum Safe Load
1659-20 0.20" to 0.42" (5.08 to 10.67 mm) 4-3/16" (106.4 mm) 3.0 lbs. (1.36 kg)
1659-30 0.31" to 0.50" (7.87 to 12.70 mm) 4-3/4" (120.7 mm) 3.8 lbs. (1.72 kg)
8,000 lbs. (3,629 kg) Maximum Safe Load
1659-40 0.49" to 0.79" (12.45 to 20.07 mm) 5-11/16" (144.5 mm) 7.8 lbs. (3.54 kg)
1659-50 0.79" to 1.01" (20.07 to 25.65 mm) 5-11/16" (144.5 mm) 7.8 lbs. (3.54 kg)
Bell System B, L, and H-1628, 1659,
1684 & 1692 Series
•
All are equipped with chain, toggle and shackle - keeps the
grip from falling off of cable
•
1659-5AT is similar to Bell-System type “B” Strand Puller.
Designed to pull 1/4" (6.35 mm) figure-8 telephone cable.
Also has serpentine jaw
1659-5AT
Cat. No. Type Cable Diameter Jaw Length Weight
5,000 lbs. (2,268 kg) Maximum Safe Load
1659-5AT "B" Strand Puller 0.20" to 0.37" (5.08 to 9.4 mm) 5" (127.0 mm) 6.7 lbs. (3.04 kg)
8,000 lbs. (3,629 kg) Maximum Safe Load
1684-5AT "L" Strand Puller 0.218" to 0.550" (5.54 to 13.97 mm) 5" (127.0 mm) 6.9 lbs. (3.13 kg)
1692-5AT "L" Strand Puller 0.218" to 0.550" (5.54 to 13.97 mm) 5" (127.0 mm) 6.6 lbs. (2.99 kg)
15,000 lbs. (6,803 kg) Maximum Safe Load
1628-16AT "H" Strand Puller 0.31" to 0.62" (7.87 to 15.75 mm) 7-1/4" (184.2 mm) 15.8 lbs. (7.17 kg)
*1692-5AT (larger clamping force than 1684-5AT)
Serpentine
Jaw
Serpentine
Jaw
Chicago
™
Grips
See Wire Pulling Grip Warnings on page 273
www.kleintools.com
284
Wire Pulling Grips