Cut Sheet

271271271
www.kleintools.com
See Wire Pulling Grip Warnings on page 261.
All dimensions are in inches and (millimeters).
Wire Pulling Grips
Chicago
TM
Grips
Notched
Jaw
Weatherproof Stranded and Solid Cable –
1611 Series
1611-30
Cat. No. Min. to Max. Cable
Diameter inches (mm)
Jaw
Length
Approx.
Weight Each
4,500 lbs. (2,041 kg) Maximum Safe Load
1611-20 .20" - .40" (5.08 mm - 10.16 mm) 4-3/16" (106 mm) 3 lbs. (1.36 kg)
1611-30 .31" - .53" (7.87 mm - 13.46 mm) 4-3/4" (121mm) 3.75 lbs (1.70 kg)
8,000 lbs. (3,629 kg) Maximum Safe Load
1611-40 .53" - .74" (13.46 mm - 18.80 mm) 5-11/16" (144 mm) 7.75 lbs (3.52 kg)
1611-50 .74" - .86" (18.80 mm - 21.84 mm) 5-11/16" (144 mm) 7.75 lbs (3.52 kg)
Note: Due to various types of weatherproof coatings available, selection of proper grips is determined by outside diameter of cable.
•
Round inside jaw contour for weatherproof coated wire.
•
Notches in jaw provide firm grip on insulation.
Aircraft Cable, EHS (Extra-High-Strength),
Messenger and Guy Strand-1613,
1628, 1684 and 1692 Series
Cat. No. Hot Latch
Model No.
Hot Latch/Spring
Model No.
Min. to Max. Cable
Diameter inches (mm)
Jaw
Length
Approx.
Weight Each
4,500 lbs. (2,041 kg) Maximum Safe Load
1613-40 1613-40H S1613-40H .12" - .37" (3.05 mm - 9.40 mm) 4-3/16" (106 mm) 3 lbs. (1.36 kg)
8,000 lbs. (3,629 kg) Maximum Safe Load
1684-5F NA NA .16" - .550" (4.06 mm - 13.97 mm) 5" (127 mm) 6.25 lbs. (2.84 kg)
1684-5 1684-5H S1684-5H .218" - .550" (5.54 mm - 13.97 mm) 5" (127 mm) 6.25 lbs. (2.84 kg)
1692-5 (larger clamping force than 1684-5) NA NA .218" - .550" (5.54 mm - 13.97 mm) 5" (127 mm) 6.40 lbs. (2.89 kg)
8,000 lbs. (3,629 kg) Maximum Safe Load – EHS Specic
1684-5C NA .160" - .550" (4.06 - 13.97 mm) 5" (127 mm) 6.25 lbs. (2.84 kg)
1684-74 (Includes curved jaw) NA S1684-74H .218" - .550" (5.54 mm - 13.97 mm) 5" (127 mm) 6.30 lbs. (2.85 kg)
15,000 lbs. (6,803 kg) Maximum Safe Load
1628-16 NA NA .31" - .62" (7.87 mm - 15.75 mm) 7-1/4" (184 mm) 15.30 lbs. (7.00 kg)
1628-17 NA NA .50" - .75" (12.70 mm - 19.05 mm) 7-1/4" (184 mm) 16.30 lbs. (7.40 kg)
1628-18 NA NA .75" - 1.00" (19.05 mm - 25.40 mm) 7-1/4" (184 mm) 15.70 lbs. (7.10 kg)
Replacement parts available:
Screws (Cat. No. 573) and
file (Cat. No. 578).
1613-40
Milled
curved
jaw
1684-74
With
file
insert
1684-5F
1684-5C
•
A family of grips designed for cable sizes
from .12" (3.10 mm) to 1" (25.4 mm).
•
Double V grooves provide four-point
contact, reducing chance of slipping
and providing proper alignment
of wire and cable (1684-5F
is a Single V with file insert).
•
Cat. No. 16845C is Aggressive
jaw profile.
•
Sawtooth
jaw profile
provides
extra gripping
power.