Cut Sheet

272
www.kleintools.com
All dimensions are in inches and (millimeters).
Wire Pulling Grips
See Wire Pulling Grip Warnings on page 261.
1659-5AT
Serpentine
Jaw
Bell System B, L, and H – 1628, 1659,
1684 & 1692 Series
•
All are equipped with chain, toggle and shackle - keeps the grip
from falling off of cable.
•
1659 - 5AT is similar to Bell-System type “B” Strand Puller.
Designed to pull 1/4" (6.35 mm) figure-8 telephone cable. Also
has serpentine jaw.
•
1684 - 5AT is identical to Bell-System type “L" Strand Puller.
•
1628 - 16AT is identical to Bell-System type “H" Strand Puller.
Cat. No. Min. to Max. Cable
Diameter inches (mm)
Jaw
Length
Approx.
Weight Each
5,000 lbs. (2,268 kg) Maximum Safe Load
1659-5AT ("B" Strand Puller) .20" - .37" (5.08 mm - 9.40 mm) 5" (127mm) 6.70 lbs. (3.03 kg)
8,000 lbs. (3,629 kg) Maximum Safe Load
1684-5AT ("L" Strand Puller) .218" - .550" (5.54 mm - 13.97 mm) 5" (127mm) 6.9 lbs (3.13 kg)
1692-5AT ("L" Strand Puller) .218" - .550" (5.54 mm - 13.97 mm) 5" (127mm) 6.6 lbs (3.00 kg)
15,000 lbs. (6,803 kg) Maximum Safe Load
1628-16AT ("H" Strand Puller) .31" - .62" (7.87 mm - 15.75 mm) 7 1/4" (184 mm) 15.80 lbs (7.16 kg)
*1692-5AT (larger clamping force than 1684-5AT)
Chicago
TM
Grips
Bare Wire – 1613 Series
•
Designed for working with solid and stranded
bare wire from .08" (2 mm) to .20" (5.1 mm).
•
Lightweight, cost-effective grip.
•
Single “V” groove jaw.
•
Cat. Nos. 1613-35 and 1613-35H
pulls #6 and #8 bare copper wire
without damaging or deforming
the cable.
1613-351613-30
Cat. No. Latch
Model
Minimum
Cable
Maximum
Cable
Jaw
Length
Approx.
Weight Each
1,500 lbs. (680 kg) Maximum Safe Load
1613-30 N/A 12 B&S solid .08" (2.03 mm) 4 B&S solid .20" (5.08 mm) 3" (76 mm) 1.50 lbs. (.68 kg)
4,500 lbs. (2,041 kg) Maximum Safe Load
1613-35 1613-35H #8 AWG Bare Copper #6 AWG Bare Copper 4-3/16" (106 mm) 6.25 lbs. (2.8 kg)
PVC-Covered Cable –
1659 Series
•
Specially machined serpentine jaws allow insulated
conductor to be inserted through jaws.
•
Eliminates necessity of stripping insulation from conductor.
•
Round inside-jaw contour.
1659-30
Serpentine
Jaw
Cat. No. Min. to Max. Cable
Diameter inches (mm)
Jaw
Length
Approx.
Weight Each
4,500 lbs. (2,041 kg) Maximum Safe Load
1659-20 .20" - .42" (5.08 mm - 10.67 mm) 4-3/16" (106 mm) 3 lbs. (1.36 kg)
1659-30 .31" - .50" (7.87 mm - 12.70 mm) 4-3/4" (121 mm) 3.75 lbs (1.70 kg)
8,000 lbs. (3,629 kg) Maximum Safe Load
1659-40 .49" - .79" (12.45 mm - 20.07 mm) 5-11/16" (144 mm) 7.75 lbs (3.52 kg)
1659-50 .79" - 1.01" (20.07 mm - 25.56 mm) 5-11/16" (144 mm) 7.75 lbs (3.52 kg)
NEW!
1613-35 and 1613-35H
pulls #6 and #8
bare copper wire