Cut Sheet

261261261
www.kleintools.com
All dimensions are in inches and (millimeters).
WARNING: Grips are to be used for temporary installation, not for
permanent anchorage.
WARNING: Do not exceed rated capacity.
WARNING: When used on/or near energized lines, ground,
insulate, or isolate grip before pulling.
WARNING: Before each use, clean jaw area and inspect grip for
proper operation to avoid slippage.
WARNING: Always match proper size and type of grip to application.
Wire Pulling Grips
Wire Pulling Grip Warnings
Types of Wire Pulling Grips
•
Latch helps maintain cable position.
•
Large-diameter eye accommodates large
hooks on hoists, winches and tackle blocks.
•
Available in Round and Double V jaw contours.
Haven’s
TM
Grips
Haven’s Grips are designed for use when a light,
compact grip is desired where conductor
deformation is not a factor.
Klein Chicago
TM
Grips
Authentic Chicago Grips are designed for use on aluminum,
copper, weatherproof coated wire, PVC covered conductors
and messenger and guy strand.
Klein Chicago
TM
, Parallel Jaw and Haven’s
TM
Grips are widely used in the power, communications, and general
construction fields to pull wire and cable. The grips maintain temporary tension until the wire or cable can be
permanently terminated.
1625-20
1656-30
KT4500
•
Locking loop handles allow the jaws to be held in
an open position for easy placement on wire or cable.
•
Available in Round, Double V, Single V and
Aggressive jaw contours.
Parallel Jaw Grips
Lightweight compact Parallel Jaw Grips pull an
exceptionally wide range of cable types and sizes.
•
Knurled eccentric jaw applies gripping pressure to 1/4" of cable area.
•
Some models include a swing latch that holds cable securely in jaw.
•
Recommended for messenger and guy strand and wire rope.
•
1625 Series can be used for wire rope.
•
When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire.
•
Standard hot-line grips are not supplied with springs or lock-open features.
•
Some grips are available with a positionable latch.
The hot-line latch is designed for placing a grip on cable with a hot-line stick. The three notches
in the hot-line latch adjust the balance of the grip to better match the direction of the cable sag.
Hot-line Latch