Cut Sheet

1656-30
1656-40
A
4,500 lbs. (2,041 kg) Maximum Safe Load
B
8,000 lbs. (3,629 kg) Maximum Safe Load
1628-16P
C
15,000 lbs. (6,803 kg) Maximum Safe Load
1656 Series
•
Round, smooth inside jaw contour on this
series of grips is ideal for bare ACSR
•
Smooth jawed grips with maximum contact
are less likely to cause cable deformation
1628-16P Series
•
Round jaws are shaped to provide maximum contact with the cable,
virtually eliminating cable deformation
•
Designed for large-diameter ACSR cables
•
These grips are special order only; please allow 30 days for delivery;
special order grips are not returnable
Cat. No. Cable Diameter Hot Latch Spring Locking Handle Jaw Length Weight
1656-20 0.20" to 0.40" (5.08 to 10.16 mm) — — — 4" ((101.6 mm) 2.7 lb (1.2 kg)
1656-20H 0.20" to 0.40" (5.08 to 10.16 mm)
•
— — 4" ((101.6 mm) 3.15 lb (1.43 kg)
S1656-20H 0.20" to 0.40" (5.08 to 10.16 mm)
• •
— 4" ((101.6 mm) 3.15 lb (1.43 kg)
1656-30 0.1" to 0.53" (7.87 to 13.46 mm) — — — 4-3/4" (120.7 mm) 3.4 lb (1.5 kg)
1656-30H 0.1" to 0.53" (7.87 to 13.46 mm)
•
— — 4-3/4" (120.7 mm) 3.95 lb (1.79 kg)
S1656-30H 0.1" to 0.53" (7.87 to 13.46 mm)
• •
— 4-3/4" (120.7 mm) 4 lb (1.81 kg)
Cat. No. Cable Diameter Hot Latch Spring Locking Handle Jaw Length Weight
1656-40 0.53" to 0.74" (13.46 to 18.80 mm) — — — 5-1/2" (139.7 mm) 7.4 lb (3.4 kg)
1656-40H 0.53" to 0.74" (13.46 to 18.80 mm)
•
— — 5-1/2" (139.7 mm) 8.5 lb (3.92 kg)
S1656-40H 0.53" to 0.74" (13.46 to 18.80 mm)
• •
— 5-1/2" (139.7 mm) 8.65 lb (3.92 kg)
1656-50 0.74" to 0.86" (18.80 to 21.84 mm) — — — 5-1/2" (139.7 mm) 7.5 lb (3.4 kg)
1656-50H 0.74" to 0.86" (18.80 to 21.84 mm)
•
— — 5-1/2" (139.7 mm) 8.45 lb (8.83 kg)
S1656-50H 0.74" to 0.86" (18.80 to 21.84 mm)
• •
— 5-1/2" (139.7 mm) 8.45 lb (3.83 kg)
1656-60 0.86" o 0.96" (21.84 to 24.38 mm) — — — 5-1/2" (139.7 mm) 7.8 lb (3.5 kg)
1656-60H 0.86" o 0.96" (21.84 to 24.38 mm)
•
— — 5-1/2" (139.7 mm) 8.4 lb (3.81 kg)
S1656-60H 0.86" o 0.96" (21.84 to 24.38 mm)
• •
— 5-1/2" (139.7 mm) 8.36 lb (3.79 kg)
Cat. No. Cable Diameter Range Jaw Length Weight
162816PE 0.31" to 0.33" (7.87 to 8.38 mm) 7-1/4" (184.15 mm) 17.0 lb (7.7 kg)
162816PF 0.33" to 0.39" (8.38 to 9.90 mm) 7-1/4" (184.15 mm) 17.0 lb (7.7 kg)
162816PG 0.40" to 0.45" (9.93 to 11.50 mm) 7-1/4" (184.15 mm) 17.0 lb (7.7 kg)
162816PH‡ 0.46" to 0.52" (11.53 to 13.08 mm) 7-1/4" (184.15 mm) 17.0 lb (7.7 kg)
162816PI 0.52" to 0.58" (13.11 to 14.68 mm) 7-1/4" (184.15 mm) 17.0 lb (7.7 kg)
162816PJ 0.58" to 0.64" (14.71 to 16.25 mm) 7-1/4" (184.15 mm) 17.0 lb (7.7 kg)
1628-16PK 0.64" to 0.70" (16.28 to 17.86 mm) 7-1/4" (184.15 mm) 17.0 lb (7.7 kg)
162816PL 0.71" to 0.76" (17.89 mm -19.43 mm) 7-1/4" (184.15 mm) 17.0 lb (7.7 kg)
162816PM 0.77" to 0.82" (19.46 to 21.03 mm) 7-1/4" (184.15 mm) 17.0 lb (7.7 kg)
162816PN 0.83" to 0.89" (21.06 to 22.61 mm) 7-1/4" (184.15 mm) 17.0 lb (7.7 kg)
‡The "H" suffix does not indicate Hot Latch for this item.
Chicago
™
Grips
See Wire Pulling Grip Warnings on page 255
www.kleintools.com
263
Wire Pulling Grips