Cut Sheet

E
25,000 lbs. (11,340 kg) Maximum Safe Load
Replacement parts available:
Screws (Cat. No. 573) and
file (Cat. No. 578).
1613-40
Milled
curved
jaw
1684-74
With
file
insert
1684-5F
1684-5C
Chicago™ Grip-Dual Conductor
Designed specifically for VR2
®
(vibration-resistant) and TransPowr
®
T-2
®
dual
conductor twisted pair cables
Machined upper and lower jaws eliminate scoring or damage to second conductor
Currently available in U size. These grips are special order only; please allow 30 days
for delivery; special order grips are not returnable
1628-40VRU
Cat. No. Cable Diameter Range Jaw Length Weight
162840VRU 1.20" to 1.27" (30.5 to 32.3 mm) 10-3/4" (273.1 mm) 34.0 lb (15.5 kg)
VR2 is a registered trademark of Southwire Company.
TransPowr and T-2 are registered trademarks of General Cable Technologies Corporation.
Aircraft Cable, EHS (Extra-High-Strength),
Messenger and Guy Strand-1613, 1628,
1684 and 1692 Series
Designed for cable sizes from
0.12" (3.10 mm) to 1" (25.4 mm)
Double V grooves provide four-point contact,
reducing chance of slipping and providing
proper alignment of wire and cable.
Cat. No. 1684-5F is a Single V with file insert.
Cat. No. 16845C is aggressive jaw profile
Sawtooth jaw profile provides extra gripping power
Cat. No. Cable Diameter Hot Latch Spring Locking Handle Jaw Length Weight
4,500 lbs. (2,041 kg) Maximum Safe Load
1613-40 0.12" to 0.37" (30.05 to 9.40 mm)
4-3/16" (106.4 mm) 2.7 lb (1.2 kg)
1613-40H 0.12" to 0.37" (30.05 to 9.40 mm)
4-3/16" (106.4 mm) 3.15 lb (1.43 kg)
S1613-40H 0.12" to 0.37" (30.05 to 9.40 mm)
4-3/16" (106.4 mm) 3.2 lb (1.4 kg)
8,000 lbs. (3,629 kg) Maximum Safe Load
1684-5F 0.16" to 0.55" (4.06 to 13.97 mm)
5" (127.0 mm) 6.4 lb (2.9 kg)
1684-5 0.218" to 0.550" (5.54 to 13.97 mm)
5" (127.0 mm) 5.8 lb (2.6 kg)
1684-5H 0.217" to 0.550" (5.54 to 13.97 mm)
5" (127.0 mm) 6.5 lb (2.9 kg)
S1684-5H 0.217" to 0.550" (5.54 to 13.97 mm)
5" (127.0 mm) 6.7 lb (3.0 kg)
1692-5 0.218" to 0.550" (5.54 to 13.97 mm)
5" (127.0 mm) 5.4 lb (2.5 kg)
8,000 lbs. (3,629 kg) Maximum Safe Load – EHS Specic
16845C 0.16" to 0.55" (4.06 to 13.97 mm)
5" (127.0 mm) 6.0 lb (2.7 kg)
1684-74 0.218" to 0.550" (5.54 to 13.97 mm)
5" (127.0 mm) 5.6 lb (2.6 kg)
1684-74H 0.218" to 0.550" (5.54 to 13.97 mm)
5" (127.0 mm) 6.3 lb (2.9 kg)
S1684-74H 0.218" to 0.550" (5.54 to 13.97 mm)
5" (127.0 mm) 6.45 lb (2.93 kg)
15,000 lbs. (6,803 kg) Maximum Safe Load
1628-16 0.31" to 0.62" (7.87 to 15.75 mm)
7-1/4" (184.2 mm) 13.7 lb (6.2 kg)
1628-17 0.50" to 0.75" (12.70 to 19.05 mm)
7-1/4" (184.2 mm) 14.6 lb (6.6 kg)
1628-18 0.75" to 1.0" (19.05 to 25.40 mm)
7-1/4" (184.2 mm) 14.1 lb (6.4 kg)
Chicago
Grips Chicago
Grips
See Wire Pulling Grip Warnings on page 255
www.kleintools.com
265
Wire Pulling Grips