Product Manual

Caulkevenly
underbearing
plate to seal
Bearing Plate
LockNut
Grade8Bolt
STEPS:
1. ContactKnaackLLCtoobtainfactoryoriginal
liftingringsystemforreplacement.
2. Eachliftingringhasaproofloadrating*stamped
onthebaseofthering;donotsubstitutewith
look-a-likecomponents;useonlyKnaack
approvedparts.
3. Eachliftingringissecuredinplacebyapairof
Grade8socketheadcapscrews,locknutsand
bearing plates.
4. Loosenthelocknutsandremovethebolts.
ALWAYSREPLACEthehardwarewithapproved
Knaackcomponents.
5. Ensurebearingplatesarereturnedtotheir
originalconguration.Discardingbearingplates
couldleadtoprematurefailure.
6. Reassembleandtighteneachboltto16ft-lbsof
torque.
7. Applyabeadofsiliconecaulkunderthe
perimeterofthebearingplate,asshown.
*Theproofloadvaluestampedonthebaseofthelifting
ringsDOESNOTindicatetheratedloadofthecontainer
forcranelifting.Valuesaretypicallyhighertoinclude
safetyfactors.
Shelf Adjustment: (Model 1020 Only)
MONSTERBOX™CabinetcomeswithAdjustableshelving.
StepstoRemoving/adjustingshelf:
1. Removeitemsfromtheshelfbeforedislocatingfromsupports.
2. Removeplasticclipsundershelfbeforeadjusting.
3. Carefullyliftupontheshelffreeingthetabsfromtheengagementslotsintheboxshelfsupport.
4. Ifdesired,removeshelfentirelyfromunit.
5. Relocateshelftopreferredmountingpositionbyaligningthesteeltabswiththeslotsinthesupportchannel.
6. Slidetheshelftabsintothesupportslotsandpressdowntofullyseatshelfandassureitissecurelymounted.
SHELF INSTRUCTIONS
REPLACING LIFT RINGS
LiftingRing
4