Specification Sheet

Heavy-Duty
150 lb. Load Class
1/2" Side Clearance
Max. Drawer Width: 36"
Profile Clearance
.51" + .01"- 0"
12.9mm + .3mm - 0mm
8650FM Heavy-Duty Soft-Close
Full Extension Drawer Slide
The 8650FM Soft-Close Full Extension Drawer Slide is designed to accommodate wider and heavier
drawers for today’s challenging applications in the commercial, residential and education markets.
This slide has a shorter profile vs. traditional lateral file slides and features a lever disconnect.
Applications
• Residential and Commercial Furniture
• Commercial Storage
• Retail Store Displays
Specifications
Model: 8650FM Full Extension Drawer Slide
Mounting: Side
Disconnect: Butterfly Lever
Hole Pattern: 32mm and Traditional
Face Frame Mounting: Slide must be blocked out. See face frame diagram (Do not use a
rear mounting bracket.)
Type: Ball-Bearing
Travel: Full Extension (14" and 16" less than full extension. See chart on back for details.)
Finish: Zinc
Length: 14", 16", 18", 20", 22", 24", 26", 28"
Clearance: .51" + .01"- 0" on each side
Height: 1.98" [50.4mm]
Packaging: Bulk Pack (8650FMB): all sizes - 5 pair per carton
Action: Telescopic
Slide Configuration: Unhanded
Load Rating
Load: 150 lb.
Max. Drawer Width: 36"
Slides: 18"
Drawer Width: 36"
Cycles: 50,000 (center pull)
As with all Knape & Vogt drawer slides, the 8650FM is designed to meet or exceed
ANSI performance standards as established by BIFMA, BHMA and KCMA.
Hardware
#7 x 1/2" Phillips Truss Head
Warranty
Limited Lifetime Warranty
.52±.01
13.1±0.3
1.98±.01
50.2±0.3
.51"
[12.9mm]
1.98"
[50.4mm]