Instructions / Assembly

80
™
Series Standard & 180
™
/181
™
Series Bracket System
OL2246/1016
1. Product Name
80 Series Wall Standard. 180/181 Series Wall Bracket. For adjustable shelving in light
industrial, commercial, and residential applications.
2. Manufacturer
Knape & Vogt
®
Manufacturing Company
2700OakIndustrialDr.NE,GrandRapids,MIUSA49505-6026
616.459.3311 | www.kv.com
3. Product Description
Basic Use: 80 Series Wall Standards and 180/181 Series Adjustable Brackets are
manufactured for storage and display applications in retail stores, grocery stores, light
warehouses, light industrial, repair garages, maintenance storage, business office
storage, and residential storage. 80 Series Wall Standards mount to most wall types.
180/181 Series Wall Brackets are fully adjustable in 1" increments.
Recommended screws (1-1/2" long with a #8 body and #6 head) are available in bulk
bags (50 per bag) and bulk cartons (6,000 per carton). Screws and anchors are available
in display pack cartons (20 bags per carton) and warehouse pack cartons (50 bags per carton).
Composition and Materials:
80 Series Standards: 16-gauge cold rolled steel
180 Series Brackets: (4"-12"): 16-gauge cold rolled steel
180 Series Brackets: (14"-20"): 14-gauge cold rolled steel
181 Series Brackets: (8"-12"): 16-gauge cold rolled steel
181 Series Brackets: (14"-16"): 14-gauge cold rolled steel
Sizes:
80 Series Standards: 5/8" wide x 13/32" deep with 1'' slot adjustment
Stock Lengths: 12", 18", 24", 36", 48", 60", 72", 84", 96" (12", 18", 84", and 96"
lengths are not available in some finishes).
180 Series Brackets: Usedforshelfdepthsof4",5",6",8",10",12",14",16",18",
and 20". (4", 5", 6", 14", 16", 18" and 20" are not available in some finishes.)
181 Series Brackets: Usedforshelfdepthsof6",8",10",12",14"and16".Available
in Anochrome finish only.
Finishes: Anochrome or Brass-look (electro-plated steel); White, Almond, Black, Brown or
Titanium (powder-coat paint). RoHS Compliant: Anochrome, White, Almond, Black, Brown
and Titanium.
4. Technical Data
Applicable Standards: Standards and brackets are tested to meet or exceed
ANSI performance standards as established by BHMA in the Knape & Vogt (KV)
recommended application.
These load limits are intended to be used as general guidelines only, and no warranty —
expressed or implied — is made by Knape & Vogt.
Results were obtained by laboratory testing in accordance with ANSI/ BHMA A156.9-2003
performance standard. (Load ratings based on standards being mounted on 16" centers.
Wider spacing will result in reduced load capacity.) Actual use conditions will typically
result in lower load capacity than laboratory conditions.
Representative testing in a fully confi gured application is the only way to assure proper
performance, durability, and safety.
The aforementioned shelf support load limit is intended as a guide only and not as a
warranty. Actual load bearing capabilities depend upon the type of cabinet/wall material
and use of appropriate shelf standard mounting fasteners, installation technique, shelf
standard spacing, shelf size and construction.
Environmental Considerations:
Environment: Excessive humidity, salts, or other chemical agents can corrode the
finish and attack metal or plastic components.
Fastening: Inadequate or incorrect fasteners can result in the standards pulling
loose and causing damage.
Alignment: Improper standard and bracket alignment can result in a system that
is ineffective and unsafe.
5. Installation
For maximum loading capacity, standards should be mounted directly to wall studs, which
are generally found at 16" intervals. (If standards will not be mounted to studs,
use appropriate wall anchors.)
Usetherecommendedfasteners(#6headand#8bodyx1-1/2"screws)inallholesto
properly secure the standard. Prior to drilling all holes, check to be sure that the standard
is vertically level.
Placethebracketintothestandardslots.Usingahammerhandleorscrewdriverhandle,
tap lightly near the bracket’s base. The bracket will snap into place.
6. Availability and Cost
Availability: Knape & Vogt (KV) products are available from stocking distributors and
through KV Representatives worldwide.
Cost: Current pricing is available from area KV Representatives. Please call for the nearest
representative at: 1.800.253.1561.
7. Warranty
Limited Lifetime Warranty: Knape & Vogt offers its standard Limited Lifetime Warranty
to the initial purchaser of commercial products. This warranty covers defects in materials
and workmanship which occur during normal use, and the remedy is limited to repair or
replacement of defective products, at KV's option. Certain types of defects and damage
are excluded from warranty coverage, costs and expenses are not covered, and additional
restrictions apply. A copy of the Limited Lifetime Warranty, with all warranty details,
limitations and disclaimers, is available on the Customer Care Connection location at
www.kv.com or from KV Customer Service, 2700 Oak Industrial Drive, Grand Rapids,
MI 49505, 1.800.253.1561.
8. Maintenance
80 Series Wall Standards and 180/181 Series Adjustable Brackets require no
maintenance. Inspect for proper fit periodically and adjust when necessary. Replace as
required or recommended by application.
9. Technical Services
Knape & Vogt and area represen tatives can assist with any application. For further
information, or for the name of the representative nearest you, please call Knape & Vogt
Customer Service: 1.800.253.1561. or visit our website at: www.kv.com.
10. Filing Systems
Additional product information, data sheets, application sheets, and a full catalog are
available upon request from Knape & Vogt.
181 Series Bracket
180 Series Bracket
This and other KV literature is available for download at www.kv.com > Resource Library
Knape & Vogt reserves the right to change product specifications at any time without notice and without incurring responsibility
for existing units. This information conforms to editorial style prescribed by The Construction Specifications Institute.
©2016 Knape & Vogt. KV and the KV logo are trademarks of Knape & Vogt.
BHMA
Knape & Vogt shelving products follow the
ANSI testing standards established by BHMA.
2700 Oak Industrial Dr. NE
GrandRapids,MI49505-6026USA
1.800.253.1561 | 616.459.3311
Fax: [phone]
www.kv.com