Specification
EcoFill
®
Wx Blowing Insulation
DATA SHEET
CONTRACTOR: ______________________________________
JOB: _______________________________________________
DATE: ______________________________________________
DESCRIPTION
EcoFill Wx blowing insulation is an unbonded, fiberglass blowing
insulation with a high degree of recycled content, designed for
weatherizing and retrofitting existinghousing or new construction.
APPLICATION
• Open blows in attics
• Dense-pack sidewalls using the drill-and fill-technique
SPECIFICATION COMPLIANCE
• ASTM C764; Type I
• HH-I-1030B; Class B Certified
• Meets the Quality Standards of the State ofCalifornia
INDOOR AIR QUALITY
• UL Environment
• GREENGUARD Certified
• GREENGUARD Gold Certified
• Validated to be Formaldehyde-Free
• EUCEB Certified
FIBERGLASS AND MOLD
Fiberglass insulation will not sustain mold growth. However,
mold can grow on almost any material when it becomes wet
and contaminated. Carefully inspect any insulation that has
been exposed to water. If it shows any sign of mold it must be
discarded. If the material is wet but shows no evidence of mold,
it should be dried rapidly and thoroughly. If it shows signs of
facing degradation from wetting, it should be replaced.
TECHNICAL DATA
Property (Unit) Test Performance
Corrosion ASTM C764 Pass
Critical Radiant Flux ASTM E970 Greater than 0.12 W/cm²
Combustibility ASTM E136 Non-combustible
Water Vapor Sorption (by weight) ASTM C1104 5% maximum
Mold Growth ASTM C1338 Pass
Surface Burning Characteristics
(ame spread/smoke developed)
ASTM E84, CAN/ULC S102 25/50
DOING MORE FOR THE WORLD WE LIVE IN.
All of our products are made from sustainable resources,
such as recycled glass and sand. And we’re proud to
be putting glass bottles back to work rather than into
landfills. Our products are made with a minimum of 50%
recycled glass—totaling an average of 26 million bottles
each month.