Datasheet

+
INNOVATIONS 2016
Precision circlip pliers
DIN 5256 for internal circlips in bore holes
Now also with overstretching limiter
For all circlips with a diameter of 8 - 100 mm
> For lasting safe assembly and dismantling of internal
circlips in drilled holes
> With overstretching limiter for standardized assembly according
to DIN 472: the adjustable stop screw prevents overexpansion
> The adjustable overstretching limiter prevents excess
expansion of the circlips
> The shape of the tips with inserted straight tips made from
drawn spring steel wire provides large contact areas for
greater installation safety
> Heavy duty in continuous operation:
up to 10 times longer service life compared to turned tips
> Precise pliers movement without play thanks to the smoothly
operating screwed joint
> Style 3 in conformance with DIN 5256 C – straight tips
> Style 4 in conformance with DIN 5254 B – 90° angled tips
Precision circlip pliers
DIN 5254 for external circlips on shafts
Now also with overstretching limiter
For all circlips with a diameter of 3 - 100 mm
> For lasting safe assembly and dismantling of external
circlips on shafts
> With overstretching limiter for standardized assembly according
to DIN 471: the adjustable stop screw prevents overexpansion
Stop screw: adjustable
opening width respectively
stretching limitation
48
49
Article No.
EAN
4003773- mm
Style Pliers Handles
Size of bore
Ø mm
Size of shaft
Ø mm
Tips
Ø mm
g
48 31 J0 079552 140
3 grey atramentized
with non-slip
plastic coating
8 - 13 0.9 105
48 41 J01 079569 130
90°
3 grey atramentized 8 - 13 0.9 105
48 41 J11 079576 130
90°
3 grey atramentized 12 - 25 1.3 105
48 41 J21 079640 165
90°
3 grey atramentized 16 - 60 1.8 175
48 41 J31 079590 210
90°
3 grey atramentized 40 - 100 2.3 265
49 41 A11 079606 130
90°
4 grey atramentized
with non-slip
plastic coating
10 - 25 1.3 102
49 41 A21 079613 165
90°
4 grey atramentized 19 - 60 1.8 169
49 41 A31 079620 210
90°
4 grey atramentized 40 - 100 2.3 272
12