Use and Care Guide

SPRAYER SET-UP

NOTE: Please reference the Package Contents section when following the sprayer

setup instructions.

WARNING: Improper tool setup could cause serious personal injury and/or can

damage the tool.

WARNING: Do not overtighten any attachment when installing. Overtightening can

cause severe damage to the tool.

1. Apply 2-3 wraps of Thread Seal Tape (not included)

around the air inlet threads of the Air Pressure

Regulator (H).

2. Attach the Female Plug (not included) to the air

inlet on the Air Pressure Regulator (H). Tighten

by turning clockwise, using the wrench (J) (17mm)

to tighten securely.

3. Attach the Air Pressure Regulator (H) to the Air

Intake on the handle bottom. Tighten by turning

clockwise, using the wrench (J) (17mm) to tighten

securely.

AIR SUPPLY SET-UP

Air Flow