Use and Care Guide

IMPORTANT: Make sure the Paint Filter (K) is

installed in the bottom of the Paint Cup (F) prior to

attaching the Paint Cup to the sprayer.

5. Replace the Cup Lid (G). Connect the air hose

coupling to the female plug and turn on the

compressor.

6. Fully open the Air Adjustment Knob (E). While

pulling the gun trigger on the paint sprayer, adjust

the air compressor pressure up or down until the

Air Pressure Regulator (H) on the paint sprayer is

within the green range.

4. Remove the Cup Lid (G) and attach the Paint Cup

(F) to Air Paint Sprayer. Tighten by turning

clockwise, using the wrench (J) (19mm) to tighten

securely.

AIR SUPPLY SET-UP

Load paint

Lid

Air