Use and Care Guide

OPEARATING INSTRUCTIONS

WARNING

The paint sprayer will not properly spray unless the fan direction is either set

vertically or horizontal.

• Before using desired paint in the spray gun, spray a compatible thinner or solvent

through the gun to remove any containments and residue.

• Before adding paint, make sure all thinner or solvents are removed from the spray

canister.

• It is recommended that you pour the material through a filter into a smaller

container prior to filling the paint cup.

• Set up a piece of cardboard or other scrap material to use as a target to test spray.

Continue to test spray until the desired spray pattern is achieved.

NOTE

Air Cap

Air Cap Ring

Horizontal Fan

Vertical Fan

1. Adjust the direction of the fan by loosening the

air cap ring (A) by hand and turning it to either

the horizontal or vertical direction. Tighten the air

cap ring by hand.

2. Set pattern size for desired shape. For a full

pattern, open pattern control knob (I ) by turning

counterclockwise.

For a round pattern, turn pattern control knob (I)

clockwise.

3. Turn the fluid control knob (D) fully clockwise

until closed .