Use and Care Guide

16
CARE AND MAINTENANCE
Cleaning Instructions
WARNIING
NEVER SUBMERGE ANY PART OF THE SPRAY GUN HOUSING INTO SOLVENT
MATERIAL(S). AIR PASSAGES WILL BECOME CLOGGED WITH DIRTY SOLVENT,
CAUSING THE GASKETS INSIDE THE GUN HOUSING TO DRY OUT, CAUSING
FASTER WEAR AND TEAR ON THE ITEM.
1. Remove the air supply from the spray gun.
2. Remove the Cup Lid (G) from the Paint Cup (F)
and empty any remaining paint back into the
original container.
3. Fill the Paint Cup (F) about 1/4 full of cleaning
solution and spray the entire contents out into a
secondary container.
4. Remove the Paint Cup (F) from the Spray Gun by
turning counterclockwise, using the wrench (J)
(19mm), and place it in the secondary container
to soak 3-5 minutes.
Note: You will need to add additional cleaning
solution to the container.
5. Unscrew the Air Cap (A) by hand turning counter
clockwise and place it in the secondary container
to soak 3 - 5 minutes.
Counterclockwise
15
1
2
Load paint
3
4
counterclockwise
G
F
F
F
J
A
w
olF
ri
A
Lid
Pull out