Use and Care Guide

CARE AND MAINTENANCE

Storage

1. When not using the spray gun, turn the fluid adjustment knob counterclockwise (to

open) which will reduce the spring tension on the needle fluid tip.

2. Store spray gun in a dry and safe place out of reach of children.

TROUBLESHOOTING

If you have any questions regarding sprayer performance, please call our Customer

Service Department at 1-888-3KOBALT, 8:00 a.m. – 8:00 p.m., EST, Monday–Friday.

SPRAY PATTERN/PROBLEM SOLUTIONPOSSIBLE REASON

Improper spray pattern

1) One side of air cap

is clogged.

2) Dirt on one side of

fluid nozzle.

1) Loose air cap/dirty

seal.

2) One side of air cap

is clogged.

3) Dried material on

one side of fluid

nozzle.

Remove air cap and soak in

solvent, then blow air through

until clean. Wipe off nozzle

tip using a rag moistened

with thinner. To clean holes,

use a broom straw or

toothpick. Never try to detach

dried material with a sharp

tool.

1) Tighten air cap.

2) Remove air cap and soak

in solvent, then blow air

through until clean. Wipe

off fluid nozzle using a rag

moistened with thinner. To

clean holes, use a broom

straw or toothpick. Never

try

to detach dried material

with a sharp tool.

5. Slide Needle Spring over the Paint Needle.

(See Figure 7)

6. Screw on the Fluid Adjustment Knob (D)

clockwise.

Clockwise

RE-ASSEMBLING SPRAY GUN