Use and Care Guide

WARRANTY

This tool is warranted by the manufacturer to the original purchaser from the original

purchase date for three (3) years subject to the warranty coverage described herein.

This tool is warranted to the original user to be free from defect in material and

workmanship. If you believe that a tool is defective, return the tool, with proper proof

of purchase to the point of purchase. If it is determined that the tool is defective and

covered by this warranty, the distributor will replace the tool or refund the purchase

This warranty is void if: defects in materials or workmanship or damages result from

repairs or alterations which have been made or attempted by others or the

unauthorized use of nonconforming parts; the damage is due to normal wear, damage

is due to abuse (including overloading of the tool beyond capacity), improper

maintenance, neglect or accident; or the damage is due to the use of the tool after

partial failure or use with improper accessories or unauthorized repair or alteration.

This warranty gives you specific legal rights, and you may also have other rights that

vary from state to state.

For warranty questions, call our customer service department at 1-888-3KOBALT,

8:00 a.m.-8:00 p.m. EST, Monday-Friday.

5. a. Be sure the hose is the proper size.

Long hose or tools using large volumes

of air may require a hose with an I.D. of

1/2 in. or larger depending on the total

length of the hoses.

b. Do not use a multiple number of hoses

connected together with quick-connect

fittings. This causes additional pressure

drops and reduces the tool power.

Directly connect the hoses together.

6. Replace rotor blade.

7. Water in tank; drain tank. (See air

compressor manual). Oil tool and run

until no water is evident. Oil tool again

and run 1-2 seconds.

Tool runs

slowly or will

not operate.

5. Pressure drops.

6. Worn rotor blade.

7. Moisture blowing

out of tool exhaust.

PROBLEM

TROUBLESHOOTING

CORRECTIVE ACTIONPOSSIBLE CAUSE

price.