Instructions

30 3130 31
Panorama Mode
With Panorama Mode, you can take
a series of pictures which will be
automatically stitched into a ultra-wide
panoramic picture by the camera.
Follow the steps below:
1. Turn the Mode dial to Panorama Mode
( ).
2. Press the arrow buttons to select a
desired shooting direction. Should
you not select a direction, the default
shooting direction is “right.” 2 seconds
later, the camera will be ready to take
pictures. You can also press the
button or press the shutter button
halfway down to be ready to take
pictures.
3. Compose the irst view of the
panoramic picture on the LCD and
press the Shutter button to capture the
image.
Save
Cancel
4. When you inish shooting the irst photo,
two target icons will display on the LCD
at left and right sides. Move the camera
to the right until the round target icon is
directly positioned over the square box.
The box will turn green when they overlap
and the camera will automatically take the
next picture. Repeat the same steps for
additional shots. Up to 4 frames can be
stitched together.
5. If continuous pictures are less than 4
shots, press the button and the camera
will automatically stitch the pictures
together. Press the playback button to
enter Playback mode to see the end effect.
6. If you take 4 pictures, the camera will
automatically stitch the pictures together.
Press the playback button to enter
Playback mode to see the inished effect.