Instructions

36 3736
7. Turn the Mode dial to switch to the
custom settings ( ).
8. The photo settings you stored the last
time are used.
When mode is used for the irst
time, there is no preset parameter
stored in the mode.
Under the mode, you need to
save or modify the set parameters
(except the parameters in ) in
restart or all modes. Please enter the
[Custom Settings] menu and select
[Yes] after setup. Otherwise, the
parameter settings will not be saved
in the case of switching the camera
on/off or in mode switching.
If you want to remove the parameter
setting in [Custom Settings], please
see the reset function instructions
on page 80 to change.
4. Press the up/down arrow buttons to
select , and press the button or
right arrow button to enter the menu.
5. Press the down arrow button select
[Custom Settings] and press the
button or the right arrow button to
enter the menu.
6. Select [Yes] to save or [No] to cancel.