Digital Photo Frame User Manual

Changing settings and more
www.kodak.com/go/support
60
The upgrade message disappears. You will not be reminded again about this firmware
version. A new message appears when the next firmware version is available.
To change your mind and upgrade to this firmware version at your convenience, see
Manually upgrade firmware, page 60.
Manually upgrade firmware
Download the firmware to your computer, then upgrade your frame:
1 On your computer, go to www.kodak.com/go/digitalframedownloads.
2 Follow the screen directions to download the frame firmware to your computer.
3 Copy the IMG file to the root directory (not in a folder or subfolder) of a memory
card or USB flash drive, then insert into the frame. See page 52 for copying files.
4 Tap (Home), then tap (Settings).
5 Highlight Firmware Upgrade, then tap OK to begin the upgrade.
IMPORTANT:
Do not turn off the frame or remove the memory card or USB flash drive
during the upgrade!
When the upgrade is complete, your frame automatically restarts. If it doesn’t, press the
power button on the frame to Off, then back to On.