Operation Manual

14
EN
1. Place on a stable,
level surface
2. Plug in the
product.
1. Select speed. 2. Adjust desired
angle.
Caution
The guard must be completely closed when
operating the product.
During operation, do not put fingers or other
objects in the guard.
Assembly
1. Install the stand to the fan and ensure that
left and right side snap in correctly.
2. Ensure the knob (with arrow) comes out
from the hole after installing the stand to
the fan
Caution
Never connect the product to the mains
when it is not completely assembled.
Installation
1. Place on a stable, level surface.
2. Connect the power plug to a suitable
electrical outlet.
Caution
The product may never be operated without
the stand or in a horizontal position.
Operation
1. To switch on the fan, press 1-3. To switch
o, press 0.
0 Switch o
1 Low speed
2 Medium speed
3 High speed
2. Adjust it to the desired angle.
Note
Switch o and disconnect the product before
adjusting height or desired angle.
KFF400M_A5_121205.indb 14 5/12/12 4:53 PM