KOFAX Document Exchange Server 2.
© 2008 - 2009 Kofax, Inc., 16245 Laguna Canyon Road, Irvine, California 92618, U.S.A. All rights reserved. Use is subject to license terms. Third-party software is copyrighted and licensed from Kofax’s suppliers. For information on third-party software included in this product, see “DESTHIRDPARTYLICENSEREADME.txt.” This product is protected by U.S. Patent No. 6,370,277. THIS SOFTWARE CONTAINS CONFIDENTIAL INFORMATION AND TRADE SECRETS OF KOFAX, INC.
Contents Introduction ...................................................................................................................................................1 Additional Documentation ..................................................................................................................1 Summary of Features ............................................................................................................................1 System Requirements ..................................
Contents iv Kofax, Inc.
Kofax Document Exchange Server Administrator’s Guide for Fujitsu Network Scanners Introduction This guide describes how to prepare the Fujitsu network scanner to work with Kofax Document Exchange Server. After performing this procedure, you can upload profiles with shortcuts from Kofax Administration Console whenever needed. Before continuing, refer to the Kofax Web site at www.kofax.com for supported models and application versions.
Kofax Document Exchange Server Administrator’s Guide for Fujitsu Network Scanners System Requirements Before setting up a network scanner with Kofax Document Exchange Server, verify that you meet the following requirements: .NET Framework 2.0 Installed on the computer you will be using for the installation of the Kofax Document Exchange Server application for the Fujitsu network scanner. Network Scanner System Version For Fujitsu fi-6000NS: in001 01.01.01.0024 For Fujitsu fi-6010N: is001 01.04.
Kofax Document Exchange Server Administrator’s Guide for Fujitsu Network Scanners For the first network scanner you install, download the Admin Tool to your computer. The download does not need to be repeated for subsequent network scanners, unless you change computers. The network scanner is restarted automatically when the application is installed. X To download the fi Network Scanner Admin Tool 1 In a browser window on your computer, enter the IP address for the network scanner.
Kofax Document Exchange Server Administrator’s Guide for Fujitsu Network Scanners Following the Installation of the Application Before you begin using the Kofax Document Exchange Server application on the network scanner, note the following procedures and information.
Kofax Document Exchange Server Administrator’s Guide for Fujitsu Network Scanners Figure 2. Network Scanner Main Menu 3 If you are starting the application for the first time or need to change the Kofax Document Exchange Server information: In the Launch DES window, press Change Server Host. Otherwise, skip to Step 5. Figure 3. Launch DES Window 4 In the Server Host Setting window, do the following and press OK: Kofax, Inc. Enter the name or IP address for Kofax Document Exchange Server.
Kofax Document Exchange Server Administrator’s Guide for Fujitsu Network Scanners Select the protocol for the connection from the network scanner to Kofax Document Exchange Server. The default protocol is HTTP. Enter the port for the connection. Note For HTTP, if no port is specified, port 80 will be used. For HTTPS, enter port 8443. Figure 4. Server Host Setting Window 5 In the Launch DES window, press Launch DES.
Kofax Document Exchange Server Administrator’s Guide for Fujitsu Network Scanners the server. The application polls the server every ten minutes, so changes may take a while to appear on the Fujitsu network scanner. Removing the Kofax Document Exchange Server Application You can remove the Kofax Document Exchange Server application when needed. The network scanner is restarted automatically when the application is removed.
Kofax Document Exchange Server Administrator’s Guide for Fujitsu Network Scanners network scanner refreshes. If the shortcuts do not display after a long period, make sure that the network scanner is connected to the network. Why do I get a “connection error” when deploying profiles? Make sure the network scanner is turned on and verify network communication (for example, ping the network scanner).
