How to Guide

Product Information
Applicable products:
Bath whirlpool – drop-in K-1139
Bath whirlpool – tile flange, left drain K-1139-L
Bath whirlpool – tile flange, right drain K-1139-R
Fixture*:
Basin area:
Bathing well 46″ (1168 mm) x 15″ (381 mm)
Top area 55″ (1397 mm) x 25″ (635 mm)
Weight 55 lbs (25 kg)
To overflow
Water depth 14″ (356 mm)
Capacity 57 gal (216 L)
* Approximate measurements for comparison only.
Drop-in cutout 58-1/2″ (1486 mm) x 34-1/2″ (876 mm)
Pump: V Hz A
1-speed 120 60 7.5
Minimum access panel
(required):
20″ (508 mm) x 15″ (381 mm)
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24″
(610 mm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
37 lbs/square foot (181 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
This fixture conforms to ANSI Standard Z124.1.2. All
dimensions are nominal.
1-1/4"
(32 mm)
Tile Flange
Detail
1-1/2"
(38 mm)
Drop-in Rim
Detail
1-1/2" OD
1"
(25 mm)
8" (203 mm)
2-7/8"
(73 mm)
3/8" (1 mm)
36" (914 mm)
60" (1524 mm)
3"
(76 mm)
No change in measurements if connected with drain
illustrated. (K-11677)
Pump/Control Access
(If Apron is Not Used)
18"
(457 mm)
2-1/2"
(64 mm)
18-1/8"
(460 mm)
16-5/8"
(422 mm)
Roughing-In
K-1139, K-1139-L, K-1139-R
PROFLEX
®
6036
BATH WHIRLPOOL
PROFLEX
®
6036 BATH WHIRLPOOL
1013749-1-
D