Installation Guide

Installation/Installation/Instalación
12
11
10
Washer
Rondelle
Arandela
Ring/Anneau/Anillo
Surface Material
Matériau de la surface
Material de la superficie
1/4"
(6 mm)
Ring
Anneau
Anillo
Spout Hose
Tuyau du bec
Manguera del
surtidor
Connect the spout hose to the
remote valve.
Connecter le tuyau du bec sur
la vanne à distance.
Conecte la manguera del surtidor
a la válvula remota.
Turn the ring until the screws are to the
front and back. Tighten the screws
securely and evenly.
Tourner l'anneau pour que les vis soient
l'avant et l'arrire. Bien serrer les vis
de manire gale.
Gire el anillo hasta que los tornillos
estén orientados hacia el frente y hacia
atrás. Apriete los tornillos con seguridad
y uniformemente.
Slide the washer onto the remote
valve shank. Thread the ring
leaving approximately 1/4" (6 mm)
between the ring and the surface
material.
Glisser la rondelle sur le manche
de valve distance. Visser l'anneau
en laissant approximativement 1/4"
(6 mm) entre l'anneau et le
matériau de la surface.
Deslice la arandela en el vástago
de la válvula remota. Enrosque el
anillo dejando aproximadamente
1/4" (6 mm) entre el anillo y el
material de la superficie.
1123724-2-D 8 Kohler Co.