Installation Guide

1. Prepare the Site
NOTE: Use thread sealant on all threaded connections.
Determine the installation location of the spout and install the
support framing as required.
Install a bath elbow and adapter (if used) on 1/2″ copper tubing
or a 1/2″ pipe of proper length and connect to the bath outlet of
the valve.
Install a temporary 1/2″ nipple to the bath elbow to extend at
least 2″ (5.1 cm) beyond the finished wall.
Securely fasten the bath members to the framing.
Turn on the water and check for leaks. Repair as required.
Shower
Outlet
Support
Framing
Spout
Location
1/2" (1.3 cm)
Adapter
1/2"
Piping
Bath Ell
Temporary
Nipple
Kohler Co. 3 113281-2-AB