Installation Guide

4. Install the Handles
Attach the stem extension to the valve stem with the provided
screw.
Place the skirt on the valve stem extension and turn the handle to
the closed position.
Remove the handle assembly, apply a ring of plumbers putty to
the base, and replace it with the handle situated in the desired
closed position.
Hold the handle in place and thread the skirt onto the valve until
it is firmly in place.
Repeat with second handle.
Screw
Valve Stem
Skirt
Handle
Stem
Extension
Apply
plumbers
putty.
1025256-2-B 6 Kohler Co.