How to Guide

Product Information
Applicable product:
Sculpted shower seat K-1843
Recommended accessories:
Sculpted shower storage K-1842
Installation Notes
IMPORTANT! This product is for new construction or
complete remodel (down to the stud framing) of tiled
showers only. Do not install this product to plastic walls
or any other material besides tile.
Install this product according to the installation guide.
Shimming may be required to create an even transition from
the wall material to the unit.
Product protrudes into the pocket stud. The intended pocket
stud should be free of plumbing, wiring, or other obstructions.
Placement of unit must be determined in advance. Installation
requires double studs at the desired location.
Seat height will vary with installation.
40-3/4"
(103.5 cm)
43-1/2"
(110.5 cm)
14-5/8"
(37.1 cm)
17-3/8"
(44.1 cm)
11-7/8"
(30.2 cm)
1-15/16"
(4.9 cm)
12-3/4"
(32.4 cm)
1/4"
(6 mm)
1/2"
(1.3 cm)
1-3/8"
(3.5 cm)
1/8"
(3 mm) R.
1-3/8"
(3.5 cm)
1-3/8"
(3.5 cm)
Roughing-In
K-1843
SCULPTED SHOWER SEAT
SCULPTED SHOWER SEAT
1071449-1-
A