How to Guide

Product Information
Applicable product:
Vessels lavatory – above-the-counter K-2191
Vessels lavatory, glazed underside –
above-the-counter or wall-mount
K-2191-G
Vessels lavatory – above-the-counter K-2200
Vessels lavatory, glazed underside –
above-the-counter or wall-mount
K-2200-G
Vessels lavatory – Artist Editions K-14223
Fixture*:
Basin area 15-7/8″ (40.3 cm) D.
Water depth 4-1/4″ (10.8 cm)
Drain hole 1-3/4″ (4.4 cm) D.
* Approximate measurements for comparison only.
Included components:
Adjustable linkage 84474
Cut-out template 1002980-7
Installation Notes
Install this product according to the installation guide.
Product does not have an overflow.
*Spout must be 5″ (12.7 cm) long (min) for adequate
clearance into the lavatory when installed with centerline as
shown.
**Spout must be tall enough to clear 3″ (7.6 cm) rim height
and provide a 1″ (2.5 cm) air gap per ASME A112.1.2
NOTICE: Countertop manufacturer or cutter must use the
cut-out template provided with the product, or a current one
provided by Kohler Co. (call 1-800-4-KOHLER). Kohler Co. is
not responsible for cut-out errors when the incorrect cut-out
template is used.
Will comply with ADA when installed per section 606
Lavatories of the Act.
Will comply with CSA B651 when installed per Clause 4.3.3
of the standard.
Will comply with OBC when installed per Clause 3.8.3.11.
Fixture conforms to ASME Standard A112.19.2/CSA B45.1. All
dimensions are nominal.
Recommended ADA Installation
24" (61 cm)
K-2200
K-14223
10"
(25.4 cm)
* L of Fitting
C
* L of Fitting
C
K-2191
10"
(25.4 cm)
16-1/4" (41.3 cm) D.
**3"
(7.6 cm)
6-3/8"
(16.2 cm)
1-1/4" OD
9"
(22.9 cm)
14"
(35.6 cm)
3/8" Hot
3/8" Cold
4" (10.2 cm)
34"
(86.4 cm)
27"
(68.6 cm)
Min
11"
(27.9 cm)
9"
(22.9 cm)
Min
2"
(5.1 cm)
8"
(20.3 cm)
Min
Roughing-In
K-2191, K-2200, K-14223
VESSELS LAVATORY
VESSELS LAVATORY
114430-1-
FG