Installation Guide

2. Install the Lavatory
TIP: To assist in positioning the bathroom sink, mark the 12, 3, 6,
and 9 o’clock positions on the underside of the countertop.
Apply a generous bead of silicone sealant around the rim of the
bathroom sink.
Position the bathroom sink with the KOHLER logo at 12 o’clock
and align the marks on the underside of the countertop with the
notches in the bathroom sink.
NOTE: To ensure the clips will not be seen once the bathroom sink
is installed, keep the edges of the clamps positioned between the
edge of the bathroom sink and the groove in the underside of the
rim.
Secure the bathroom sink with the clips and screws.
Immediately wipe away any excess sealant.
Clip
Notch
Mark
Anchor Screw
Anchor
Groove
1145059-2-C 4 Kohler Co.