How to Guide

Product Information
Applicable product:
Lavatory less soap dispenser hole K-2917-8
Lavatory less soap dispenser hole K-2917-4
Lavatory with soap dispenser hole on left K-2917-4L
Lavatory with soap dispenser hole on right K-2917-4R
Lavatory less soap dispenser hole K-2917-1
Lavatory with soap dispenser hole on left K-2917-1L
Lavatory with soap dispenser hole on right K-2917-1R
Fixture*:
Basin area 14″ (35.6 cm) x 12″ (30.5 cm)
Water depth 5″ (12.7 cm)
Drain hole 1-11/16″ (4.3 cm) D.
* Approximate measurements for comparison only.
Holes K-2917-8 K-2917-4 K-2917-1
Spout 1-1/8″
(2.9 cm) D.
1-1/8″
(2.9 cm) D.
1-3/8″
(3.5 cm) D.
Faucet 1-3/8″
(3.5 cm) D.
1-3/16″
(3.3 cm) D.
Soap
dispenser
1-1/4″
(3.2 cm) D.
Included components:
Overflow ferrule 84896
Cut-out template 101082-7
Installation Notes
Install this product according to the installation guide.
NOTICE: Countertop manufacturer or cutter must use the
cutout template provided with the product, or a current one
provided by Kohler Co. (call 1-800-4-KOHLER). Kohler Co. is
not responsible for cutout errors when the incorrect cutout
template is used.
Will comply with ADA when installed per Section 606
Lavatories of the Act.
Will comply with CSA B651 when installed per Clause 4.3.3
of the standard.
Will comply with OBC when installed per Clause 3.8.3.11.
Fixture conforms to ASME Standard A112.19.1/CSA B45.2. All
dimensions are nominal.
6"
(15.2 cm)
Max.
3/4"
(2 cm)
2-3/4"
(7 cm)
2-3/4"
(7 cm)
2-3/4"
(7 cm)
5-1/2"
(14 cm)
5-1/2"
(14 cm)
6-7/8"
(17.5 cm)
6-1/8"
(15.6 cm)
8-5/8"
(21.9 cm)
31"
(78.7 cm)
Recommended ADA Installation
14" (35.6 cm)10" (25.4 cm)(S)
(T) Pop-up drain 14-3/16" (36 cm),
grid drain 13-5/16" (33.8 cm).
Supply (Based on 12" riser
which may require cutting).
K-2917-4
K-2917-1
K-2917-8
1-1/4"
OUTLET
4" (10.2cm)
4" (10.2 cm)
6-1/8" (15.6 cm)
1/2" (1.3 cm)
19" D. (48.3cm)
(T)
(S)
3/8" HOT
3/8" COLD
4" (10.2 cm)
9"
(22.9 cm)
Min.
8"
(20.3 cm)
Min.
27"
(68.6 cm)
Min.
34"
(86.4 cm)
2-1/2"
(6.4 cm)
24" (61 cm)
-L -R
-L
-R
K-2917-8
K-2917-4
Standard Installation
K-2917-1
Roughing-In
K-2917
RADIANT
®
COUNTERTOP LAVATORY
RADIANT
®
COUNTERTOP LAVATORY
105072-1-
EG