Manualshelf

Installation Guide

ManualsBrandsKOHLER ManualsPlumbing ProductRite-Temp Pressure-Balancing Valve with Screwdriver Stops and PEX Crimp Connections
12345678910
1. Prepare the Valve
IMPORTANT! The internal components of the valve will only need
to be removed for back-to-back installations (reversed valve only) or
installations that require soldering of connections.
NOTE: Only valves with stops will include the stop assembly.
Installations Requiring Soldering
Remove the plaster guard (not shown).
Remove internal valve components as shown and set aside.
Back-to-Back Installations
Remove the plaster guard (not shown).
For the reversed valve, remove internal components as shown
and set aside. The stop assembly does not need to be removed if
soldering is not needed.
Stop
Assembly
1110626-2-J 6 Kohler Co.