Installation Guide

2. Complete the Installation
NOTE: Depending upon the cabinet style, you may need to notch
the top of the cabinet frame for the mounting clips so they sit flush
with the top of the cabinet.
Thread screws through each mounting clip into the side of the
cabinet.
Lower the rail onto the mounting clips.
Attach the bolt caps to the bolts.
Carefully lower the sink onto the rails.
Adjust the bolts to raise and level the sink until it is flush with
the underside of the countertop.
Complete the sink installation following the sink manufacturer’s
instructions.
Rail
Notch
Cabinet
Screws
Adjustment
Bolt
Mounting Clip
Arms
Bolt Cap
Mounting Clip
1032021-2-J 4 Kohler Co.