How to Guide

Product Information
Applicable product:
Self-rimming kitchen sink, single-hole K-5818-1
Self-rimming kitchen sink, 2-hole K-5818-2
Self-rimming kitchen sink, 3-hole K-5818-3
Self-rimming kitchen sink, 4-hole K-5818-4
Undercounter kitchen sink, 5-hole K-5818-5U
Fixture*:
Basin area 14-1/8″ (359 mm) x 16-1/4″ (413 mm)
Water depth 9″ (229 mm)
Drain holes Ø 3-7/8″ (98 mm)
Faucet holes Self-rimming: Ø 1-3/8″ (35 mm)
Undercounter: Ø 2-3/8″ (60 mm)
* Approximate measurements for comparison only.
Included components:
Cut-out template 1125670-7
Undermount sink kit 23″ (584
mm)
1054375
Optional accessories:
Hardwood countertop cutting board K-5917
Bottom basin rack (left basin) K-6016L
Bottom basin rack (right basin) K-6016R
Wire rinse basket (left basin) K-6603L
Wire rinse basket (right basin) K-6603R
P-Trap K-9000
Installation Notes
Install this product according to the installation guide.
NOTICE: The countertop manufacturer or cutter must use
the cut-out template provided with the product, or a current
one provided by the Kohler Co. (Call 1-800-4-KOHLER.)
Kohler Co. is not responsible for cut-out errors when the
incorrect cut-out template is used.
Fixture conforms to ASME Standard A112.19.1/CSA B45.2. All
dimensions are nominal.
4"
(102 mm)
4" (102 mm)
4" (102 mm)
1-13/16"
(46 mm)
1-13/16"
(46 mm)
4" (102 mm)
16-1/2" (419 mm)
1-13/16"
(46 mm)
1-13/16"
(46 mm)
1-13/16"
(46 mm)
K-5818-4
K-5818-3
K-5818-2
K-5818-1
7-5/16"
(186 mm)
10" (254 mm)
1-1/2"
(38 mm)
33" (838 mm)
1/2"
(13 mm)
9-5/8"
(244 mm)
15"
(381 mm)
1-1/2" OD
22"
(559 mm)
K-5818-5U
1-13/16"
(46 mm)
14-11/16" (373 mm)
4"
(102 mm)
16-1/2" (419 mm)
Roughing-In
K-5818
HARTLAND
TM
KITCHEN SINK
HARTLANDTM KITCHEN SINK
1124835-1-
C