How to Guide

Product Information
Applicable product:
3-hole sink, tile-in K-6534-3
4-hole sink, tile-in K-6534-4
4-hole sink, undercounter K-6534-4U
Fixture*:
Basin area 14″ (35.6 cm) x 15″ (38.1 cm)
Water depth 8″ (20.3 cm)
Drain holes 3-5/8″ (9.2 cm) D.
Faucet holes,
undercounter
2-3/8″ (6 cm) D.
Faucet holes, tile-in 1-3/8″ (3.5 cm) D.
* Approximate measurements for comparison only.
Recommended accessories:
P-Trap K-9000
Optional accessories:
Hardwood cutting board K-5984
Duostrainer
®
sink strainer K-8801
Installation Notes
Install this product according to the installation guide.
Due to the special nature of this installation, Kohler Co.
recommends that an experienced cabinet maker use the
actual sink to build the new cabinet or modify an existing
cabinet.
For undercounter installations, allow a 3/4″ (1.9 cm) reveal to
support the K-5984 cutting board.
Fixture dimensions are nominal and conform to tolerances in
ASME Standard A112.19.1M.
K-6534-4
K-6534-4U
K-6534-3
4" (10.2 cm)
4-1/4"
(10.8 cm)
2"
(5.1 cm)
4" (10.2 cm)
2" (5.1 cm)
2-5/8" (6.7 cm)
10"
(25.4 cm)
4-1/4"
(10.8 cm)
1-1/4"
(3.2 cm) R.
1"
(2.5 cm) R.
22-1/8"
(56.2 cm)
16-1/2"
(41.9 cm)
1-3/4"
(4.4 cm)
33" (83.8 cm)
1-1/2" OD
7/8"
(2.2 cm) R.
8-5/8"
(21.9 cm)
8-3/4"
(22.2 cm)
14"
(35.6 cm)
12"
(30.5 cm)
2-1/4"
(5.7 cm)
10-1/2"
(26.7 cm)
3/8"
(1 cm)
5/8"
(1.6 cm)
1"
(2.5 cm) R.
4" (10.2 cm)
2"
(5.1 cm)
4-1/4"
(10.8 cm)
Roughing-In
K-6534
HAWTHORNE
APRON FRONT KITCHEN SINK
HAWTHORNE APRON FRONT KITCHEN SINK
111206-1-
EC