Installation Guide

15. Install the Sliding Panel
CAUTION: Risk of product damage. Carefully and thoroughly clean the header. Make sure there is no debris in
the roller tracks.
NOTE: The rollers face the outside of the shower.
Remove the corner protectors from the sliding panel.
With help, from inside the shower, tilt the panel to position the tops of the rollers inside the header. Rest the rollers on
the lower track of the header and set the panel in place.
Ensure that the panel can roll back and forth smoothly. If necessary, adjust the rollers according to the instructions in
the “Panel Adjustment and Maintenance” section.
Press the roller covers onto the roller bolts.
Kohler Co. 19
1443363-2-B