How to Guide

Product Information
Applicable product:
5’ bath whirlpool K-852-H2
ADA compliant when installed per Section
607 of the Act.
Fixture*:
Bathing well:
Basin area, bottom 40-1/2″ (1029 mm) x 20″ (508 mm)
Basin area, top 52-3/4″ (1340 mm) x 24″ (610 mm)
Weight 290 lbs (131.5 kg)
To overflow:
Water depth 13-5/8″ (346 mm)
Capacity 60 gal (227.1 L)
* Approximate measurements for comparison only.
Pump kW V A*
1.5 240 11
* Approximate measurements for comparison only.
Drop-in cut-out 58-1/2″ (1486 mm) x 30-1/2″
(775 mm)
Cut-out for undermount K-586 template
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Pump/control 208-240 V, 20 A, 50/60 Hz
Installation Notes
NOTE: Pump protrusion beyond rim.
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
60 lbs/square foot (290 kg/square meter) loading.
Cast iron whirlpools are extremely heavy, making some
drop-in installations difficult. Splitting the deck/surround is
recommended if installing into a deck.
Fixture conforms to ASME A112.19.1/CSA B45.2. All
dimensions are nominal.
K-852-H2
No change in measurements if connected with
drain illustrated. (K-7169-AF or K-7169M-AF)
1-1/2" OD
32" (813 mm)
NOTE: Pump Protrusion Beyond Rim
Pump/Control Access
34" (864 mm) W x 15" (381 mm) H
1-3/4"
(44 mm)
60" (1524 mm)
14" (356 mm)
1-5/8"
(41 mm)
2-1/2"
(64 mm)
2-7/8"
(73 mm)
3" (76 mm)
1/4" (6 mm)
16"
(406 mm)
3/4"
(19 mm)
18-1/4"
(464 mm)
Roughing-In
K-852-H2
TEA-FOR-TWO
®
5’ BATH WHIRLPOOL
TEA-FOR-TWO
®
5’ BATH WHIRLPOOL
1019494-1-
F