Dimensions Guide

Technical Information
Fixture*:
Bathing well:
Basin area, bottom 40-1/2″ (1029 mm) x 20″ (508 mm)
Basin area, top 52-3/4″ (1340 mm) x 24″ (610 mm)
Weight 290 lbs (131.5 kg)
To overflow:
Water depth 13-5/8″ (346 mm)
Capacity 60 gal (227.1 L)
* Approximate measurements for comparison only.
Pump kW V A*
1.5 240 11
* Approximate measurements for comparison only.
Drop-in cutout 58-1/2″ (1486 mm) x 30-1/2″ (775 mm)
Cut-out for undermount K-586 template
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Pump/control 208-240 V, 20 A, 50/60 Hz
Locate the outlet behind the whirlpool and within 24″
(610 mm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
60 lbs/square foot (290 kg/square meter) loading.
Cast iron whirlpools are extremely heavy, making some
drop-in installations difficult. Splitting the deck/surround is
recommended if installing into a deck.
Pump must be relocated to custom position at the time of
installation. Provide adequate clearance.
No change in measurements if
connected with drain illustrated.
(K-7169-AF or K-7169M-AF)
1-1/2" OD
32" (813 mm)
2-1/2" (64 mm)
2-7/8"
(73 mm)
3" (76 mm)
1/4" (6 mm)
3/4"
(19 mm)
18-1/4"
(464 mm)
6" (152 mm) Max
10" (254 mm)
Max
K-852-HB
Pump/Control Access
34" (864 mm) W x
15" (381 mm) H
60" (1524 mm)
14" (356 mm)
1-5/8"
(41 mm)
16"
(406 mm)
K-852-HE
Pump/Control Access
34" (864 mm) W x
15" (381 mm) H
Product Diagram
TEA-FOR-TWO
®
TEA-FOR-TWO
®
5’ BATH WHIRLPOOL
Page2of2
1019700-4-
H