Installation Guide

1. DTV+ System Layout
The K-99695 system controller powers the interface(s) and controls the lighted rain panel and other system
components.
Determine the locations of all required components.
Route the 25’ (7.6 m) data cable from the PDS installation location to the controller installation
location. If the PDS is not within 25’ (7.6 m) of the controller, add an Ethernet-style extension cable.
Route the 30’ (9.14 m) chroma power cable from the PDS installation location to the rain panel
installation location.
For cable connections, refer to the ″Connect the Cables″ section.
Before Operating the System For the First Time:
Download and install the latest software for connected components. This may take an hour or more to
complete based on system configuration and internet connection speed. Do not disconnect the power from
any components during software download and installation.
Router
AC
Power
Controller
Component Cable
Connections
Interface
(Up to Three)
Digital
Valve(s)
Power Data
Supply
Rain Panel 100-240 VAC
30' (9.1 m) Chroma Power Cable
25' (7.6 m)
Data Cable
1235394-2-A 4 Kohler Co.