Installation Guide

15. Complete the Installation
CAUTION: Risk of electric shock. For surface-mount installation, side mirror kit K-99012 or wood
kit K-99675 is required to enclose exposed electrical wiring.
For surface-mount installation: Install side mirror kit K-99012 or wood kit K-99675 to enclose the
exposed electrical wiring.
Adjust the Door
The hinges can be adjusted for proper door functionality and alignment.
Refer to the illustration above and note the screwdriver location for the desired adjustment.
Adjust the Mirror
CAUTION: Risk of Product Damage. Rotate the mirror inward, flush with the door, before closing the
door.
Slide the makeup mirror up or down to the desired height.
Rotate the mirror in toward the door when not in use.
Care and Cleaning
For best results, keep the following in mind when caring for your KOHLER product:
NOTE: Periodic care and maintenance should include checking all hinge screws on the door to make sure
they are tight and engaged in the hinge holes.
•
Do not use bristle brushes, abrasive sponges or abrasive cleaners. They will scratch some surfaces.
•
Do not let cleaners sit or soak on surfaces.
Surface-Mount
Kohler Co. 19 1267931-2-F